MHP2-MS1H-5-2-M5

Festo - Solenoid Valve

Current response time:

7 Minutes 28 Seconds

Description: Solenoid Valve
Width: 10 mm
Ambient temperature: -5 C ... 40 C
Electrical connection: 2-pin Plug
Valve function: 5/2, monostable
Actuation type: Electrical
Standard nominal flow rate: 90 l/min
Pneumatic working port: M5
Operating voltage: 24V DC
Operating pressure: -0.9 bar ... 8 bar
Structural design: Pressure-relieved poppet valve
Reset method: Mechanical spring
Degree of protection: IP65
Certification: RCM compliance mark c UL us - Recognized (OL)
CE marking (see declaration of conformity): As per EU EMC directive As per EU RoHS directive
UKCA marking (see declaration of conformity): To UK instructions for EMC To UK RoHS instructions
Nominal width: 2 mm
Width dimension: 14 mm
Note on grid dimension: Minimum distance between the valves is 4 mm
Exhaust air function: With flow control option
Sealing principle: Soft
Mounting position: Any
Manual override: Non-detenting
Type of control: Direct
Flow direction: Non-reversible
Symbol: 00991129
Lap: Underlap
Reverse polarity protection: Bipolar
Additional functions: Spark suppression Holding current reduction Protective circuit
Max. switching frequency: 300 Hz

Switching time off: 1.7 ms
On switching time: 1.9 ms
Tolerance for switching time off: +10 %/-30 %
Tolerance for ON switching time: +10%/-30%
Switching time variation at 1 Hz and above: 0.2 ms
Duty cycle: 100%
Coil characteristics: 24 V DC: low-current phase 1.625 W, high-current phase 6.5 W
Permissible voltage fluctuations: +/- 10 %
Operating medium: Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media: Operation with oil lubrication possible (required for further use)
Vibration resistance: Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Restricted ambient and media temperature: Depending on the switching frequency (see diagram)
Shock resistance: Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC): 2 - Moderate corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Cleanroom class: Class 6 according to ISO 14644-1
Temperature of medium: -5 C ... 40 C
Max. tightening torque for valve mounting: 0.4 Nm
Max. tightening torque of pneumatic fitting: 1.5 Nm
Product weight: 70 g
Type of mounting: On PR rail
Pneumatic connection 1: Sub-base
Pneumatic connection 2: M5
Pneumatic connection 3: Sub-base
Pneumatic connection 4: M5
Pneumatic connection 5: Sub-base
Note on materials: RoHS-compliant
Seals material: HNBR NBR
Housing material: Die-cast metal, coated
Material of screws: Steel, galvanized

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on MHP2-MS1H-5-2-M5 . Santa Clara Systems carries 4,555 items from Festo.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.