UA63-30-00RA-80

ABB - UA63-30-00RA 220-230V 50Hz / 230-240V 60Hz Contactor

Current response time:

By 5AM PT on Monday

Emergency?

Description: UA63-30-00RA 220-230V 50Hz / 230-240V 60Hz Contactor
Product ID: 1SBL371024R8000
Extended Product Type: 1SBL371024R8000
Product Net Weight: 1.350 kg
Product Net Width: 70 mm
Product Net Height: 150 mm
Product Net Depth: 140.4 mm
Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
Ambient Air Temperature: Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 C Near Contactor for Operation in Free Air (Uc) -40 ... +70 C Close to Contactor for Storage -60 ... +80 C
Rated Impulse Withstand Voltage (Uimp): 8 kV
Rated Insulation Voltage (Ui): acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V acc. to UL/CSA 600 V
Terminal Type: Screw Terminals
Number of Auxiliary Contacts NO: 0
Number of Auxiliary Contacts NC: 0
Connecting Capacity Main Circuit: Rigid Cable 6 ... 16 mm Flexible with Cable End 6 ... 10 mm
GOST Certificate: GOST_POCCFRME77B07175
Maximum Operating Altitude Permissible: 3000 m
Rated Control Circuit Voltage (Uc): 50 Hz 220 230 V 60 Hz 230 240 V
Climatic Withstand: acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
Connecting Capacity Auxiliary Circuit: Rigid Cable 1 ... 4 mm Flexible with Cable End 0.75 ... 2.5 mm
Operate Time: Between Coil Energization and NO Contact Closing 8 ... 27 ms Between Coil De-energization and NO Contact Opening 4 ... 11 ms
Number of Main Contacts NO: 3
Number of Main Contacts NC: 0
Short-Circuit Protective Devices: gG Type Fuses 200 A
Maximum Breaking Capacity: cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
Coil Consumption: Average Holding Value 50 / 60 Hz 18 V·A Average Holding Value 50 / 60 Hz 5.5 W Average Holding Value 50 Hz 18 V·A Average Holding Value 50 Hz 5.5 W Average Holding Value 60 Hz 18 V·A Average Holding Value 60 Hz 5.5 W Average Pull-in Value 50 Hz 180 V·A Average Pull-in Value 60 Hz 210 V·A
Coil Operating Limits: (acc. to IEC 60947-4-1) 0.85 ... 1.1 x Uc (at 55 C) C

Connecting terminals (delivered in open position) Main poles: M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
EAN: 3471522304803
Minimum Order Quantity: 1 piece
Customs Tariff Number: 85369085
Package Level 1 Width: 160 mm
Package Level 1 Length: 200 mm
Package Level 1 Height: 85 mm
Package Level 1 Gross Weight: 1.35 kg
Package Level 1 EAN: 3471522304803
Package Level 2 Units: 63 piece
Package Level 1 Units: 1 piece
Rated Operational Voltage: Main Circuit 690 V
Rated Short-time Withstand Current (Icw): at 40 C Ambient Temp, in Free Air, from a Cold State 10 s 650 A at 40 C Ambient Temp, in Free Air, from a Cold State 15 min 135 A at 40 C Ambient Temp, in Free Air, from a Cold State 1 min 250 A at 40 C Ambient Temp, in Free Air, from a Cold State 1 s 1000 A at 40 C Ambient Temp, in Free Air, from a Cold State 30 s 370 A
Maximum Electrical Switching Frequency: 240 cycles per hour
RoHS Status: No declaration needed
Instructions and Manuals: 1SBC101002M5501
CB Certificate: CB_FR3449_60016915-509739D
CSA Certificate: CSA_1033838_LR056745
Data Sheet, Technical Information: 1SBC101140C0203
Declaration of Conformity - CE: 1SBD250805U1000
EAC Certificate: EAC_RU C-FR ME77 B01010
RoHS Information: 1SBC101059D0201
ETIM 4: EC001079 - Capacitor magnet contactor
ETIM 5: EC001079 - Capacitor magnet contactor
ETIM 6: EC001079 - Capacitor contactor
UNSPSC: 39121529
Object Classification Code: Q

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on UA63-30-00RA-80 . Santa Clara Systems carries 36,928 items from ABB.

Whatever Its Level. The Ua..ra Series 3-Pole Contactors Are Of The Block Type Design. - Main Poles: 3 Main Poles - Control Circuit: Ac Operated With Laminated Magnet Circuit - Accessories: A Wide Range Of Accessories Is Available.

Ua63..ra 3-Pole Contactors For Capacitor Switching
Can Be Used In Installations In Which The Peak Current Far Exceeds 100 Times Nominal Rms Current. The Contactors Are Delivered Complete With Their Damping Resistors And Must Be Used Without Additional Inductances (See Table Below). The Capacitors Must Be Discharged (Maximum Residual Voltage At Terminals ≤ 50 V) Before Being Re-Energized When The Contactors Are Making. Their Electrical Durability Is 250 000 Operating Cycles For Ue < 500 V And 100 000 Operating Cycles For 500 V ≤ Ue ≤ 690 V. The Ua..ra Contactors Are Fitted With A Special Front Mounted Block
Which Ensures The Serial Insertion Of 3 Damping Resistors Into The Circuit To Limit The Current Peak On Energization Of The Capacitor Bank. Their Connection Also Ensures Capacitor Precharging In Order To Limit The Second Current Peak Occurring Upon Making Of The Main Poles. The Insertion Of Resistors Allows To Damp The Highest Current Peak Of The Capacitor When Switching On