Out of Stock

XCC3510PS84CBN

Telemecanique - absolute encoder Ø 58 multi turn - solid shaft 10 mm - 25-bit binary - CANopen

Current response time:

11 Minutes 37 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: absolute encoder Ø 58 multi turn - solid shaft 10 mm - 25-bit binary - CANopen
Product weight: 1.23 lb(US) (0.56 kg)
Range of product: OsiSense XCC
IP degree of protection: IP64 IEC 60529
Device short name: XCC
Vibration resistance: 10 gn (10...2000 Hz) IEC 60068-2-6
Shock resistance: 100 gn (6 ms) IEC 60068-2-27
Electrical connection: 1 male + 1 female connectors + 1 cable gland M12 radial 5 pins Pg 9 radial for network input/ouputs and external supply
[Us] rated supply voltage: 24 V DC
Protection type: Reverse polarity protection, Voltage peaks protection
Enclosure material: Aluminium
Resolution: 4096 turns/8192 points
Encoder type: Multiturn absolute encoder fieldbus
Shaft tolerance: H8
Product certifications: CiA, Schneider Electric interoperability standards
Supply voltage limits: 10...30 V DC
Marking: CE
Maximum revolution speed: 6000 rpm
Ambient air temperature for operation: -40...185 F (-40...85 C)
Product specific application: -

Shaft moment of inertia: 0.01 lb.in (30 g.cm)
Ambient air temperature for storage: -40...185 F (-40...85 C)
Diameter: 2.28 in (58 mm)
Torque value: 0.03 lbf.in (0.003 N.m)
Bus type: CANopen S10 (Transparent Ready) DS 406 V3.1, class C2 DR303-1V1.3, DR303-3 V1.2., ISO 11898, DS301 V4.02/CAN2.A
Maximum load: 11 daN radial
Shaft diameter: 0.39 in (10 mm)
Output frequency: 800 kHz
Shaft type: Solid shaft
Current consumption: 0...100 mA no-load
Resistance to electrostatic discharge: 2 kV contact discharge level 2 IEC 61000-4-2, 4 kV air discharge level 2 IEC 61000-4-2
Resistance to electromagnetic fields: 9.14 V/yd (10 V/m) level 3 IEC 61000-4-3
status LED: 1 LED green CAN_RUN, 1 LED red CAN_ERR
Resistance to fast transients: 1 kV signal ports level 3 IEC 61000-4-4, 2 kV power ports level 3 IEC 61000-4-4
Type of output stage: CANopen 25-bit
Surge withstand: 0.5 kV level 1 IEC 61000-4-5
Base material: Aluminium
Transmission rate: 800 kbit/s, 250 kbit/s, 125 kbit/s, 50 kbit/s, 10 kbit/s, 20 kbit/s, 1000 kbit/s, 500 kbit/s
Shaft material: Stainless steel
Type of ball bearings: 6000ZZ1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XCC3510PS84CBN . Santa Clara Systems carries 10,327 items from Telemecanique.