Out of Stock

XCC1514TS25X

Telemecanique - incremental encoder Ø 58 - through shaft 14 mm - 2500 points - 5V RS422

Current response time:

14 Minutes 56 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: incremental encoder Ø 58 - through shaft 14 mm - 2500 points - 5V RS422
Product weight: 0.96 lb(US) (0.435 kg)
Range of product: OsiSense XCC
IP degree of protection: IP65 conforming to IEC 60529
Vibration resistance: 10 gn (f = 55...2000 Hz) conforming to IEC 60068-2-6
Shock resistance: 30 gn 11 ms conforming to IEC 60068-2-27
Electrical connection: 1 male connector M23 radial 12 pins
[Us] rated supply voltage: 4.75...30 V DC
Protection type: Short-circuit protection, Reverse polarity protection
Enclosure material: Zamak
Resolution: 2500 points
Encoder type: Incremental encoder
Shaft tolerance: H7
Marking: CE
Residual ripple: 500 mV
Ambient air temperature for operation: -22...212 F (-30...100 C)
Encoder name: XCC
Maximum revolution speed: 6000 rpm
Ambient air temperature for storage: -22...185 F (-30...85 C)
Product specific application: -

Shaft moment of inertia: 0.01 lb.in (22 g.cm)
Diameter: 2.28 in (58 mm)
Torque value: 0.05 lbf.in (0.006 N.m)
Shaft diameter: 0.55 in (14 mm)
Maximum load: 2 daN axial, 5 daN radial
Shaft type: Through shaft
Output frequency: 300 kHz
Resistance to electrostatic discharge: 4 kV (contact discharge) level 3 conforming to IEC 61000-4-2, 8 kV (air discharge) level 3 conforming to IEC 61000-4-2
Number of channels: 3
Resistance to electromagnetic fields: 9.14 V/yd (10 V/m) level 3 conforming to IEC 61000-4-3
Output stage: Type X
Current consumption: 0...75 mA (no-load)
Resistance to fast transients: 1 kV (signal ports) level 3 conforming to IEC 61000-4-4, 2 kV (power ports) level 3 conforming to IEC 61000-4-4
Type of output stage: Driver 5V, RS422
Maximum output current: 40 mA
Output level: Low level: 0.5 V maximum (20 mA), High level: 4.5 V minimum (20 mA)
Surge withstand: 1 kV, level 2 conforming to IEC 61000-4-5
Base material: Aluminium
Shaft material: Stainless steel
Type of ball bearings: 6803ZZ

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on XCC1514TS25X . Santa Clara Systems carries 10,327 items from Telemecanique.