Out of Stock

TSXCFY11

Telemecanique - motion control module - for stepper motors - Unity Pro - 1 axis - 3.8 W

Current response time:

6 Minutes 23 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: motion control module - for stepper motors - Unity Pro - 1 axis - 3.8 W
Product weight: 0.97 lb(US) (0.44 kg)
Range of product: Modicon Premium Automation platform
Operating altitude: <= 6561.68 ft. (2000 m)
Electrical connection: 1 connector HE-10 20 pins1 connector SUB-D 15
Relative humidity: 5...95 % without condensation
Output type: Open collector PNP brake output conforming to EN/IEC 61131-2RS422, TTL 5 V open collector NPN compatible amplifier output
Input voltage: 24 V 7 mA auxiliary input5 V 4.5 mA amplifier input
Input type: Current sink auxiliary input conforming to EN/IEC 61131 type 2Resistive amplifier input
Operating mode: AUTODirect drive modeManuallyOFF
I/O modularity: 1 axis
Ambient air temperature for operation: 32...140 °F (0...60 °C)
Product or component type: Motion control module
Pulse frequency: <= 187 kHz
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Product specific application: For stepper motors
power dissipation in W: 3.8 W
Software designation: Unity Pro
Discrete input logic: Negative amplifier inputPositive auxiliary input
Input voltage limits: 19...30 V auxiliary input
Voltage state 1 guaranteed: < 2 V amplifier input>= 11 V auxiliary input
Current state 1 guaranteed: >= 6 mA auxiliary input
Voltage state 0 guaranteed: <= 5 V auxiliary input> 3.6 V amplifier input
Current state 0 guaranteed: <= 2 mA auxiliary input

Input impedance: 3400 Ohm auxiliary input
Input immunity: < 250 µs auxiliary input for homing cam and event inputs15...30 µs amplifier input for loss of step input3000...10000 µs auxiliary input for limit switch, emergency stop and external stop inputs3000...16000 µs amplifier input for amplifier fault input
Power supply monitoring: 0...14 V auxiliary input at fault state18...24 V auxiliary input at OK state
Maximum detection time: < 30 ms auxiliary input from fault to OK state> 1 ms auxiliary input from OK to fault state
Input compatibility: With 2-wire/3-wire sensor auxiliary input
Output differential voltage: +/- 2 V <= 100 Ohm amplifier output
Output short-circuit current: < 150 mA amplifier output
Permissible common mode voltage: <= 7 V amplifier output
Permissible differential voltage: <= 12 V amplifier output
Output voltage: 24 V DC 19...30 V brake output
Nominal output current: 0.5 A < 0.3 mA 0.625 A brake output
Voltage drop: < 1 V at state on brake output
Switching time: < 0.25 ms brake output
Output compatibility: Positive logic DC inputs (resistance <= 15 kOhm) brake output
Short-circuit protection: Thermal tripping via program or automatically brake output
Output overload protection: Current limiter brake output
Output overvoltage protection: Zener diode brake output
Reverse polarity protection: Reverse mounted diode on supply brake output
Speed profile path: Trapezoidal
Checks: Sensor power supplyConsistency of commandsAmplifier, limits switches, emergency stopCorrect execution by software position limits, loss of stepShort circuit (one signaling bit per channel)Validity of parameters
Optional commands: BoostBrake
Local signaling: 2 LEDs green axis diagnostics available (CH.)1 LED green module operating (RUN)1 LED red external fault (I/O)1 LED red internal fault, module failure (ERR)
Current consumption: 510 mA 5 V DC50 mA DC
Module format: Standard

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on TSXCFY11 . Santa Clara Systems carries 10,431 items from Telemecanique.