Out of Stock

RM0PAS101

Telemecanique - insulation control relay - for AS-Interface cabling system - 29.5..31.6 V DC

Current response time:

13 Minutes 53 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: insulation control relay - for AS-Interface cabling system - 29.5..31.6 V DC
Product weight: 0.57 lb(US) (0.26 kg)
Range of product: AS-Interface cabling system
IP degree of protection: IP2x conforming to IEC 60529
Standards: EN/IEC 60204-2, IEC 61131-2 Type 2, EN/IEC 60204-1
Width: 3.54 in (90 mm)
Height: 2.99 in (76 mm)
Depth: 2.28 in (58 mm)
[Ui] rated insulation voltage: 2000 V between terminals and mounting rails
Tightening torque: 5.31 lbf.in (0.6 N.m) with flat 3.5 mm screwdriver
[Ith] conventional free air thermal current: 5 A at 24 V
System Voltage: 29.5...31.6 V DC measuring input, 50 V DC output relay
Shock resistance: 15 gn 11 ms conforming to IEC 60068-2-27
Vibration resistance: 0.7 gn (f = 5...100 Hz) conforming to IEC 60068-2-6
Electrical connection: Screw terminal block, clamping capacity: 1 x 0.09...1 x 1.5 mm AWG 28...AWG 16, flexible with cable end, Screw terminal block, clamping capacity: 1 x 0.14...1 x 2.5 mm AWG 26...AWG 14, flexible without cable end, Screw terminal block, clamping capacity: 1 x 0.14...1 x 4 mm AWG 26...AWG 12, solid, Screw terminal block, clamping capacity: 2 x 0.09...2 x 0.75 mm AWG 28...AWG 20, flexible with cable end, Screw terminal block, clamping capacity: 2 x 0.2...2 x 2.5 mm AWG 24...AWG 14, solid
Response time: < 20 ms opening of relay contacts (measuring input), < 5 ms AS-Interface communication interrupt (measuring input)
Product certifications: AS-Interface No 16701
Product or component type: Insulation control relay
average consumption in mA: 50 mAat 30 V
Additional information: Supplied with an impedance adaptor

Supply: Via AS-Interface line
Input detection threshold: < 15 kOhm AS-i + Earth, < 7 kOhm AS-i - Earth
Resistance to incandescent wire: 1382 F (750 C), extinction time: < 30 s conforming to IEC 60695-2-1
Number of outputs: 2 relay, each with 1 NO contact(s)
[In] rated current: 2 A at 13 V, U/R = 10 ms, 5 A at 12 V
Current consumption: 13 mAat 24 Vfor test input and reset input
Resistance to electrostatic discharge: 6 kV on contact conforming to IEC 61000-4-2, 8 kV in open air conforming to IEC 61000-4-2
Voltage state 1 guaranteed: > 11 V (test input and reset input)
Resistance to radiated fields: 13.72 V/yd (15 V/m), radio frequency fields = 80...1000 Hz conforming to IEC 61000-4-3
Current state 1 guaranteed: >= 5 mA (test input and reset input)
Resistance to fast transients: 1 kV on the inputs conforming to IEC 61000-4-4, 2 kV AS-Interface conforming to IEC 61000-4-4
Voltage state 0 guaranteed: < 5 V (test input and reset input)
Ambient air temperature for operation: 23...140 F (-5...60 C)
Current state 0 guaranteed: <= 2 mA (test input and reset input)
Ambient air temperature for storage: -13...158 F (-25...70 C)
Pollution degree: 2 conforming to IEC 60654
Installation category: II conforming to IEC 60664
Fixing mode: Clip-on, mounting on 35 x 15 mm symmetrical DIN rail on chassis, Clip-on, mounting on 35 x 15 mm symmetrical DIN rail on mounting plate, Clip-on, mounting on 35 x 7.5 mm symmetrical DIN rail on chassis
Local signaling: 1 LED green, function: output relays energized, 1 LED green, function: reset input at state 1, 1 LED green, function: supply to relay on and no fault present, 1 LED red, function: insulation fault, polarity AS-Interface -, 1 LED red, function: insulation fault, polarity AS-Interface +, 1 LED yellow, function: test input at state 1

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on RM0PAS101 . Santa Clara Systems carries 10,327 items from Telemecanique.