Out of Stock

ABL8RED24400

Telemecanique - redundancy module - 40A - for regulated SMPS

Current response time:

8 Minutes 19 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: redundancy module - 40A - for regulated SMPS
Product weight: 1.54 lb(US) (0.7 kg)
Range of product: Phaseo
IP degree of protection: Conforming to EN/IEC 60529
Standards: UL 508, CSA C22.2 No 60950-1
Operating altitude: 6561.68 ft. (2000 m)
Connections - terminals: Screw type terminals output connection, connection capacity: 2 x 0.5...2 x 10 mm AWG 20...AWG 8, Screw type terminals input connection, connection capacity: 4 x 0.5...4 x 10 mm AWG 20...AWG 8, Removable screw terminal block diagnostic relay, connection capacity: 1 x 2.5 mm AWG 14
Vibration resistance: 3.5 mm (f = 3...11.9 Hz) conforming to EN/IEC 61131-2, 2 gn (f = 11.9...150 Hz) conforming to EN/IEC 61131-2
Overvoltage category: Class II conforming to VDE 0106-1
Relative humidity: 0...90 % during operation, 0...95 % during storage
Input voltage: 24...28.8 V DC
Input voltage limits: 22...30 V
Product or component type: Redundancy module
Input current: 20 A

Ambient air temperature for operation: -13...140 F (-25...60 C)
Number of output channels: 1
Ambient air temperature for storage: -40...185 F (-40...85 C)
Output voltage: (Uin-0.2) V DC
Output protection type: Against overload, protection technology: external protection by power supply, Against short-circuits, protection technology: external protection by power supply
Maximum output current: 40 A
Fixing mode: By clips on 35 mm symmetrical DIN rail, operating position: horizontal, By clips on 35 mm symmetrical DIN rail, operating position: vertical
Output coupling: Parallel
Dielectric strength: 500 V between input and ground, 500 V between output and ground
Product certifications: EAC, RCM
Marking: CE
Name of test: Conducted/radiated emissions conforming to EN 55022 Class B, Electrostatic discharges conforming to EN/IEC 61000-4-2, Emission conforming to EN 50081-1, Emission conforming to EN 61000-6-3, Induced electromagnetic field conforming to EN/IEC 61000-4-6 level 3, Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3, Rapid transient conforming to IEC 61000-4-4 level 3, Surge conforming to EN/IEC 61000-4-5 level 2
Environmental characteristic: EMC conforming to EN 61000-6-3, EMC conforming to EN/IEC 61000-6-2, Safety conforming to EN/IEC 60950-1, Safety conforming to EN/IEC 61204
Local signaling: 1 relay, function: power supply status, 1 LED per input green, function: power supply status

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ABL8RED24400 . Santa Clara Systems carries 10,326 items from Telemecanique.