Out of Stock

Telemecanique TSX CTY4A 4 channels counter modules - 40 kHz - 36 mA at 24 V DC, 330 mA at 5 V DC Product Image

TSXCTY4A

Telemecanique - 4 channels counter modules - 40 kHz - 36 mA at 24 V DC, 330 mA at 5 V DC

Current response time:

By 5AM PT on Wednesday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: 4 channels counter modules - 40 kHz - 36 mA at 24 V DC, 330 mA at 5 V DC
Product weight: 0.95 lb(US) (0.43 kg)
Range of product: Modicon Premium Automation platform
Protective treatment: TC
Operating altitude: <= 6561.68 ft. (2000 m)
Electrical connection: 2 connectors HE-10 20 pins, 4 connectors SUB-D 15
Relative humidity: 5...95 % without condensation
Response time: < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)
Switching frequency: < 0.6/LI Hz on inductive load
Input voltage: 24 V 18 mA 2/3-wire proximity sensors PNP/NPN, 24 V 7 mA auxiliary input (preset, enable and read), 5 V 18 mA encoder input
Counting frequency: 40 kHz
Product or component type: Counter modules
power dissipation in W: 8...11.5 W
Ambient air temperature for operation: 32...140 F (0...60 C)
I/O modularity: 4 channels
Cycle time: 10 ms
Ambient air temperature for storage: -13...158 F (-25...70 C)
Electrical circuit type: Auxiliary output conforming to EN/IEC 61131
Discrete input logic: Current sink auxiliary input (preset, enable and read) conforming to IEC 1131 Type 2, Resistive 2/3-wire proximity sensors PNP/NPN conforming to IEC 1131 Type 2, Resistive encoder input
Input logic: Positive
Input compatibility: Incremental encoder 10...30 V totem pole, Incremental encoder 5 V DC RS422

Input voltage limits: <= 5.5 V encoder input, 19...30 V 2/3-wire proximity sensors PNP/NPN, 19...30 V auxiliary input (preset, enable and read)
Voltage state 1 guaranteed: >= 11 V 2/3-wire proximity sensors PNP/NPN, >= 11 V auxiliary input (preset, enable and read), >= 2.4 V encoder input
Current state 1 guaranteed: >= 3.7 mA encoder input, >= 6 mA 2/3-wire proximity sensors PNP/NPN, >= 6 mA auxiliary input (preset, enable and read)
Voltage state 0 guaranteed: <= 1.2 V encoder input, <= 5 V 2/3-wire proximity sensors PNP/NPN, <= 5 V auxiliary input (preset, enable and read)
Current state 0 guaranteed: <= 1 mA encoder input, <= 2 mA 2/3-wire proximity sensors PNP/NPN, <= 2 mA auxiliary input (preset, enable and read)
Input impedance: > 270 Ohm at U = 2.4 V encoder input, 1400 Ohm at Un 2/3-wire proximity sensors PNP/NPN, 3400 Ohm at Un auxiliary input (preset, enable and read), 400 Ohm at Un encoder input
Output voltage: 24 V DC
Nominal output current: 0.5 A
Output voltage limits: 19...30 V
Voltage drop: < 0.5 V at state 1
Output compatibility: Positive logic DC inputs (resistance <= 15 kOhm) auxiliary output
Leakage current: < 0.1 mA
Output overload protection: Current limiter, Thermal tripping via program or automatically
Output short-circuit protection: Current limiter, Thermal tripping via program or automatically
Output overvoltage protection: Zener diode
Reverse polarity protection: Reverse diode on supply
Checks: Sensor power supply
Current consumption: 330 mA 5 V DC, 36 mA 24 V DC
Module format: Standard
Local signaling: 4 LEDs green axis diagnostics available (CH.), 1 LED green module operating (RUN), 1 LED red external fault (I/O), 1 LED red internal fault, module failure (ERR)

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on TSXCTY4A . Santa Clara Systems carries 10,417 items from Telemecanique.