Out of Stock

RM35HZ21FM

Telemecanique - frequency control relay RM35-HZ - range 40..70 Hz

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: frequency control relay RM35-HZ - range 40..70 Hz
Range of product: Zelio Control
IP degree of protection: IP20(terminals) conforming to IEC 60529, IP30 (casing) conforming to IEC 60529
Standards: IEC 60255-6, NF EN 60255-6
Width: 1.38 in (35 mm)
[Ui] rated insulation voltage: 400 V conforming to IEC 60664-1
Mechanical durability: 30000000 cycles
Tightening torque: 5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1
Connections - terminals: Screw terminals 1 x 0.5...1 x 4 mm - AWG 20...AWG 11, solid cable without cable end, Screw terminals 2 x 0.5...2 x 2.5 mm - AWG 20...AWG 14, solid cable without cable end, Screw terminals 1 x 0.2...1 x 2.5 mm - AWG 24...AWG 12, flexible cable with cable end, Screw terminals 2 x 0.2...2 x 1.5 mm - AWG 24...AWG 16, flexible cable with cable end
Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Operating rate: <= 360 operations/hour under full load
Vibration resistance: 0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1, 1 gn (f = 57.6...150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1
Shock resistance: 15 gn 11 ms conforming to IEC 60255-21-1
Electrical durability: 100000 cycles
Insulation resistance: > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5, > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Utilization category: AC-12 conforming to IEC 60947-5-1, AC-13 conforming to IEC 60947-5-1, AC-14 conforming to IEC 60947-5-1, AC-15 conforming to IEC 60947-5-1, DC-12 conforming to IEC 60947-5-1, DC-13 conforming to IEC 60947-5-1, DC-14 conforming to IEC 60947-5-1
Control circuit voltage limits: - 15 % + 10 % Un
[Us] rated supply voltage: 120...277 V AC
Overvoltage category: III conforming to IEC 60664-1
Relative humidity: 95 % at 131 F (55 C) conforming to IEC 60068-2-30
Housing material: Self-extinguishing plastic
Dielectric test voltage: 2 kV AC 50 Hz
Reset time: 2000 ms for time delay
Immunity to micro breaks: 10 ms
Product or component type: Modular measurement and control relays
Maximum switching voltage: 250 V AC/DC
Electromagnetic compatibility: Emission standard for industrial environments conforming to EN/IEC 61000-6-4, Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3, Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Relay type: Frequency control relays
Relay name: RM35HZ21FM

Product certifications: C-Tick, GOST, UL, CSA, GL
Relay monitored parameters: Overfrequency and underfrequency 50 or 60 Hz
Supply voltage limits: 102...308 V AC
Ambient air temperature for storage: -40...158 F (-40...70 C)
Time delay: Adjustable 0.1...10 s, +/- 10 % on crossing the threshold
Control circuit frequency: 40...70 Hz
Ambient air temperature for operation: -4...122 F (-20...50 C)
switching capacity in VA: 1250 VA
Minimum switching current: 10 mA at 5 V DC
Output contacts: 1 C/O + 1 C/O
power consumption in VA: <= 6 VA AC
Contacts material: Cadmium free
Measurement range: 40...70 Hz frequency
Nominal output current: 5:00 AM
Input frequency: 70 Hz
Pollution degree: 3 conforming to IEC 60664-1
Measuring cycle: <= 200 ms measurement cycle as true rms value
Run-up delay at power-up: 0.5 s
Non-dissipating shock wave: 4 kV
Hysteresis: 0.3 % fixed
Measurement accuracy: +/- 10 % of the full scale value in input, +/- 10 % of the full scale value in time delay
Repeat accuracy: +/- 0.5 % input and measurement circuit, +/- 0.5 % time delay
Measurement error: +/- 0.05 %/C with temperature variation, < +/- 1 % over the whole range with voltage variation
Threshold setting: -10...2 Hz, -2...10 Hz
Marking: CE : 73/23/EEC, CE : EMC 89/336/EEC
Supply frequency: 50/60 Hz +/- 10 %
Insulation: No galvanic insulation between supply and measurement
Operating position: Any position without derating
status LED: 1 LED green power ON, 1 LED yellow correct frequency (high R1), 1 LED yellow correct frequency (low R2)

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on RM35HZ21FM . Santa Clara Systems carries 10,327 items from Telemecanique.