LC1D12V7

Telemecanique - Contactor

Current response time:

8 Minutes 49 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Contactor
IP degree of protection: IP20 front face conforming to IEC 60529
Standards: CSA C22.2 No 14
Device short name: LC1D
Width: 45 mm
Height: 77 mm
Depth: 86 mm
Protective treatment: TH conforming to IEC 60068-2-30
[Ui] rated insulation voltage: Power circuit: 690 V conforming to IEC 60947-4-1
[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947
Operating altitude: 3000 m without
Mechanical durability: 15 Mcycles
Tightening torque: Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm
Connections - terminals: Power circuit: screw clamp terminals 1 cable(s) 14 mmflexible without cable end
Range: TeSys
Mounting support: Plate
[Ith] conventional free air thermal current: 25 A (at 60 C) for power circuit
Product name: TeSys D
[Uc] control circuit voltage: 400 V AC 50/60 Hz
Electrical durability: 2 Mcycles 12 A AC-3 at Ue <= 440 V
Insulation resistance: > 10 MOhm for signalling circuit
motor power kW: 3 kW at 220...230 V AC 50/60 Hz (AC-3)
[Ie] rated operational current: 25 A (at <60 C) at <= 440 V AC AC-1 for power circuit
Control circuit voltage limits: Drop-out: 0.3...0.6 Uc AC 50/60 Hz (at 60 C)
Poles description: 3P
Overvoltage category: III
Operating time: 12...22 ms closing
Associated fuse rating: 10 A gG for signalling circuit conforming to IEC 60947-5-1
Control circuit type: AC at 50/60 Hz
Product or component type: Contactor
Contactor application: Motor control
Utilisation category: AC-3

Power pole contact composition: 3 NO
[Ue] rated operational voltage: Power circuit: <= 690 V AC 25...400 Hz
motor power HP (UL / CSA): 0.5 hp at 115 V AC 50/60 Hz for 1 phase motors
Auxiliary contact composition: 1 NO + 1 NC
Irms rated making capacity: 250 A at 440 V for power circuit conforming to IEC 60947
Rated breaking capacity: 250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current: 105 A 40 C - 10 s for power circuit
Average impedance: 2.5 mOhm - Ith 25 A 50 Hz for power circuit
Power dissipation per pole: 0.36 W AC-3
Safety cover: With
Product certifications: GL
Safety reliability level: B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
Maximum operating rate: 3600 cyc/h 60 C
Coil technology: Without built-in suppressor module
inrush power in VA: 70 VA 60 Hz cos phi 0.75 (at 20 C)
hold-in power consumption in VA: 7.5 VA 60 Hz cos phi 0.3 (at 20 C)
Heat dissipation: 23 W at 50/60 Hz
Auxiliary contacts type: type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
Signalling circuit frequency: 25...400 Hz
Minimum switching current: 5 mA for signalling circuit
Minimum switching voltage: 17 V for signalling circuit
Non-overlap time: 1.5 ms on de-energisation between NC and NO contact
Pollution degree: 3
Ambient air temperature for operation: -560 C
Ambient air temperature for storage: -6080 C
Permissible ambient air temperature around the device: -4070 C at Uc
Fire resistance: 850 C conforming to IEC 60695-2-1
Flame retardance: V1 conforming to UL 94
Mechanical robustness: Vibrations contactor open: 2 Gn, 5...300 Hz
Toxic heavy metal free: Yes
Mercury free: Yes
Circularity Profile: End of Life Information

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LC1D12V7 . Santa Clara Systems carries 10,327 items from Telemecanique.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.