LXM32MD72N4

Schneider - Motion Servo Drive

Product Summary:

Product or component type: Motion servo drive
Device short name: LXM32M
Format of the drive: Book
Network number of phases: Three phase
Switching frequency: 8 kHz

Current response time:

7 Minutes 56 Seconds

*Santa Clara Systems is not a Schneider Authorized Distributor.

Description: Motion Servo Drive
Product or component type: Motion servo drive
Device short name: LXM32M
Format of the drive: Book
Network number of phases: Three phase
Switching frequency: 8 kHz
Overvoltage category: III
Leakage current: <= 30 mA
Output voltage: <= power supply voltage
Electrical isolation: Between power and control
Type of cable: Single-strand IEC cable (for ? = 50 C) conductor material: copper 90 C ,wire insulation material: XLPE/EPR
Electrical connection: Terminal cable 3 mm AWG 12 (CN8)
Tightening torque: 0.5 N.m (CN8)
Discrete input number: 2 capture
Discrete input type: Capture (CAP)
Sampling duration: 0.25 ms
Discrete input voltage: 24 V DC for capture
Discrete input logic: Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Response time: <= 5 ms (compliment of STO_A, compliment of STO_B)
Discrete output number: 3
Discrete output type: Logic (DO) 24 V DC
Discrete output voltage: <= 30 V DC
Discrete output logic: Positive or negative (DO) conforming to EN/IEC 61131-2
Contact bounce time: <= 1 ms (compliment of STO_A, compliment of STO_B)
Braking current: 50 mA
Response time on output: 250 s (DO) discrete
Control signal type: Pulse train output (PTO) RS422 <= 500 kHz <= 100 m
Protection type: Against reverse polarity :inputs signal
Safety function: STO (safe torque off), integrated

Safety level: SIL 3 conforming to EN/IEC 61508
Communication interface: Integrated Modbus
Connector type: RJ45 (labelled CN7) :Modbus
Commissioning port: 2-wire RS485 multidrop Modbus
Transmission rate: 9600, 19200, 38400 bps for bus length of 40 m Modbus
Number of addresses: Modbus
status LED: 1 LED (red) servo drive voltage
Signalling function: Display of faults in 7 segments
Marking: CE
Operating position: Vertical +/- 10 degree
Product compatibility: Servo motor BMH (140 mm, 2 motor stacks)
Width: 108 mm
Height: 270 mm
Depth: 237 mm
Product weight: 4.8 kg
Electromagnetic compatibility: Conducted EMC at class A group 1 conforming to EN 55011
Standards: EN/IEC 61800-3
Product certifications: CSA
IP degree of protection: IP20 conforming to EN/IEC 60529
Vibration resistance: 1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60028-2-27
Pollution degree: 2 conforming to EN/IEC 61800-5-1
Environmental characteristic: Classes 3C1 conforming to IEC 60721-3-3
Relative humidity: Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation: 0...50 C conforming to UL
Ambient air temperature for storage: -25...70 C
Type of cooling: Integrated fan
Operating altitude: <= 1000 m without derating

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LXM32MD72N4 . Santa Clara Systems carries 2,189 items from Schneider.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.