Out of Stock

PN7000

Efector - Pressure Switch

Current response time:

By 5AM PT on Monday

Emergency?

Description: Pressure Switch
Electrical Design: Pnp/Npn
Output Function: Normally Open / Closed; (Configurable)
Material: Stainless Steel (1.4301 / 304); Stainless Steel (1.4404 / 316L); Pc; Pbt; Pei; Fkm
Media: Liquids And Gases
Conditionally Suitable For: Use In Gases At Pressures > 25 Bar Only On Request
Medium Temperature [C]: -25...80
Pressure Rating: 600 Bar 8700 Psi 60 Mpa
Min. Bursting Pressure: 1000 Bar 14500 Psi 100 Mpa
Type Of Pressure: Relative Pressure
Operating Voltage [V]: 18...36 Dc; (According To En 50178 Selv/Pelv)
Current Consumption [Ma]: < 35
Min. Insulation Resistance [M?]: 100; (500 V Dc)
Protection Class: Iii
Reverse Polarity Protection: Yes
Overvoltage Protection: Yes; (< 40 V)
Power-On Delay Time [S]: 0.3
Integrated Watchdog: Yes
Number Of Inputs And Outputs: Number Of Digital Outputs: 2
Total Number Of Outputs: 2
Output Signal: Switching Signal; Io-Link; (Configurable)
Number Of Digital Outputs: 2
Max. Voltage Drop Switching Output Dc [V]: 2
Permanent Current Rating Of Switching Output Dc [Ma]: 250
Switching Frequency Dc [Hz]: < 170
Short-Circuit Protection: Yes
Type Of Short-Circuit Protection: Yes (Non-Latching)
Measuring Range: 0...400 Bar 0...5800 Psi 0...40 Mpa
Set Point Sp: 4...400 Bar 60...5790 Psi 0.4...40 Mpa
Reset Point Rp: 2...398 Bar 30...5760 Psi 0.2...39.8 Mpa
In Steps Of: 2 Bar 30 Psi 0.2 Mpa
Factory Setting: Sp1 = 100 Bar Rp1 = 92 Bar Sp2 = 300 Bar Rp2 = 292 Bar

Switch Point Accuracy [% Of The Span]: < 0,5
Repeatability [% Of The Span]: < 0,1; (With Temperature Fluctuations < 10 K)
Characteristics Deviation [% Of The Span]: < 0,25 (Bfsl) / < 0,5 (Ls); (Bfsl = Best Fit Straight Line; Ls = Limit Value Setting)
Hysteresis Deviation [% Of The Span]: < 0,25
Long-Term Stability [% Of The Span]: < 0,05; (Per 6 Months)
Temperature Coefficient Zero Point [% Of The Span / 10 K]: 0,2; (0...80 C)
Temperature Coefficient Span [% Of The Span / 10 K]: 0,2; (0...80 C)
Delay Time Programmable Ds, Dr [S]: 0; 0,2...50
Parameter Setting Options: Hysteresis / Window; Normally Open / Closed; Diagnostic Function; Switching Logic; Switch-On/Switch-Off Delay; Damping; Display Unit
Communication Interface: Io-Link
Transmission Type: Com2 (38,4 Kbaud)
Io-Link Revision: 1.1
Sdci Standard: Iec 61131-9 Cdv
Io-Link Device Id: 307 D / 00 01 33 H
Profiles: No Profile
Sio Mode: Yes
Required Master Port Class: A
Process Data Analogue: 1
Process Data Binary: 2
Min. Process Cycle Time [Ms]: 2.3
Ambient Temperature [C]: -20...80
Storage Temperature [C]: -40...100
Protection: Ip 67
Emc: En 61000-4-2 Esd 4 Kv Cd / 8 Kv Ad En 61000-4-3 Hf Radiated 10 V/M En 61000-4-4 Burst 2 Kv En 61000-4-5 Surge 0,5/1 Kv En 61000-4-6 Hf Conducted 10 V
Shock Resistance: Din Iec 68-2-27 50 G (11 Ms)
Vibration Resistance: Din Iec 68-2-6 20 G (10...2000 Hz)
Materials (Wetted Parts): Stainless Steel (1.4305 / 303); Ceramics; Fkm
Min. Pressure Cycles: 100 Million
Process Connection: Threaded Connection G 1/4 Internal Thread
Display: Display Unit 3 X Led, Green Switching Status 2 X Led, Yellow Function Display Alphanumeric Display, 4-Digit Measured Values Alphanumeric Display, 4-Digit
Alternate Manufacturer Name: IFM

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on PN7000 . Santa Clara Systems carries 2,282 items from Efector.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.