Out of Stock

STBNIB2212

Telemecanique - standard Network Interface Module STB - Interbus - 500 kbit/s

Current response time:

13 Minutes 34 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: standard Network Interface Module STB - Interbus - 500 kbit/s
Product weight: 0.34 lb(US) (0.155 kg)
Range of product: Modicon STB distributed I/O solution
IP degree of protection: IP20 conforming to EN 61131-2 class 1
Width: 5.05 in (128.3 mm)
Height: 1.57 in (40 mm)
Depth: 2.76 in (70 mm)
Operating altitude: <= 6561.68 ft. (2000 m)
Vibration resistance: +/-0.35 mm (f = 10...58 Hz), 5 gn (f = 58...150 Hz) on 35 x 15 mm symmetrical DIN rail, 3 gn (f = 58...150 Hz) on 35 x 7.5 mm symmetrical DIN rail
Shock resistance: 30 gn 11 ms conforming to IEC 88 reference 2-27
[Us] rated supply voltage: 24 V DC
Overvoltage category: II
Relative humidity: 95 % at 140 F (60 C) without condensation
number of addressable I/O module: 0...32 per island
Electromagnetic compatibility: Immunity to electromagnetic interference conforming to IEC 61131-2
Product or component type: Standard Network Interface Module
Communication service: Logical addressing, Diagnostics, Implicit exchange of process data
Product certifications: CSA, ATEX Cat 3G, UL, C-Tick, FM Class 1 Division 2

Integrated connection type: Interbus conforming to InterBus Club 9-way female isolated RS485 SUB-D 1 twisted shielded pair (output bus), Interbus conforming to InterBus Club HE-13 (RS232 port), Interbus conforming to InterBus Club 8-way female (RS232 port), Interbus conforming to InterBus Club 9-way male isolated RS485 SUB-D 1 twisted shielded pair (input bus)
Pollution degree: 2 conforming to IEC 60664-1
Number of segments: 1 primary, maximum 6 extensions
Power supply type: SELV
Number of slave: 512
Supply current: >= 700 mA
Transmission rate: 500 kbit/s for bus length of 0...1312.34 ft. (0...400 m) per bus segment between stations, 500 kbit/s for bus length of 0...164.04 ft. (0...50 m) for the installation bus, 500 kbit/s for bus length of 0...41994.75 ft. (0...12800 m) for the bus between stations
Supply voltage limits: 19.2...30 V
Ambient air temperature for operation: 32...140 F (0...60 C) without derating, -13...158 F (-25...70 C) with derating factor
Structure type: Industrial field bus (Generation4)
Input current: 430 mA for supply circuit
Ambient air temperature for storage: -40...185 F (-40...85 C)
Nominal output current: 1.2 A, 0.575 A (140...158 F (60...70 C))
Output impedance: <= 0.05 Ohm at 100000 kHz
Output voltage: 5.25 V DC (tolerance: +/- 0.21 %) logic bus
Marking: CE
status LED: 1 LED red module error (ERR), 1 LED green island state (RUN), 1 LED green power supply (PWR), 1 LED yellow test mode, 1 LED green BA, 1 LED green RC, 1 LED red RD

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on STBNIB2212 . Santa Clara Systems carries 10,327 items from Telemecanique.