ASIABLB3002

Telemecanique - regulated switch mode power supply - AS-I - 100..240 V - 30 V - 2.4 A

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: regulated switch mode power supply - AS-I - 100..240 V - 30 V - 2.4 A
Product weight: 1.76 lb(US) (0.8 kg)
Range of product: Phaseo AS-Interface
IP degree of protection: IP20 conforming to EN/IEC 60529
Operating altitude: 6561.68 ft. (2000 m)
Connections - terminals: Screw type terminals for AS-Interface line, connection capacity: 4 x 2.5 mm, number of terminals = 4, cable cross section = 0 in (2.5 mm) AWG 14, Screw type terminals for input connection, connection capacity: 2 x 2.5 mm, number of terminals = 2, cable cross section = 0 in (2.5 mm) AWG 14, Screw type terminals for input ground connection, connection capacity: 1 x 2.5 mm, number of terminals = 1, cable cross section = 0 in (2.5 mm) AWG 14, Screw type terminals for output ground connection, connection capacity: 2 x 2.5 mm, number of terminals = 2, cable cross section = 0 in (2.5 mm) AWG 14
Mounting support: 75 mm symmetrical DIN rail, 35 mm symmetrical DIN rail
Relative humidity: 0...95 % without condensation or dripping water
Input voltage: 100...240 V AC phase to phase, terminal(s): L1-L2, 100...240 V AC single phase, terminal(s): N-L1
Input voltage limits: 85...264 V
Product certifications: CSA 22-2 No 950, UL 508, TUV 60950-1
Product or component type: Power supply
Network frequency limits: 47...63 Hz
Environmental characteristic: EMC conforming to EN 50081-1, EMC conforming to EN 55022 Class B, EMC conforming to EN/IEC 61000-6-2, Safety conforming to EN 60950-1
Power supply type: Regulated switch mode
Input voltage tolerance: - 15...10 %
Output voltage: 30 V DC AS-Interface line
Inrush current: < 30 A

Ambient air temperature for operation: 122...140 F (50...60 C) with derating factor, 32...122 F (0...50 C) without derating factor
rated power in W: 72 W
Cos phi: 0.65
Ambient air temperature for storage: -13...158 F (-25...70 C)
Efficiency: > 83 %at 30 V
Power supply output current: 2.4 A
power dissipation in W: 14.7 Wat 30 V
Dielectric strength: 3000 V between input and ground, 3000 V between input and output, 500 V between output and ground, 500 V between outputs
Operating position: Vertical
Current consumption: 0.5 A
Input protection type: Integrated fuse (not interchangeable)
Line and load regulation: 3%
Residual ripple: 300 mV
Holding time: >= 10 ms
Output protection type: , protection technology: 1.1 x In, , protection technology: tripping if U > 1.2 x Un, , protection technology: automatic reset, , protection technology: tripping if U < 0.95 x Un
Name of test: Conducted/radiated emissions conforming to EN 55022 Class B, Electrostatic discharges conforming to EN/IEC 61000-4-2, Emission conforming to EN 61000-6-3, Induced electromagnetic field conforming to EN/IEC 61000-4-6, Primary outage conforming to IEC 61000-4-11, Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3, Rapid transient conforming to IEC 61000-4-4 level 3, Vibration conforming to EN/IEC 61131-2
meantime between failure [MTBF]: > 100000 hat 104 F (40 C)
status LED: 1 LED green output voltage, 1 LED orange input voltage

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ASIABLB3002 . Santa Clara Systems carries 10,327 items from Telemecanique.