Out of Stock

SH30553P11A2000

Telemecanique - servo motor SH3 055 1,2Nm,key,single,nobrake,90°conn.IP54/IP65,9k RPM

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: servo motor SH3 055 1,2Nm,key,single,nobrake,90°conn.IP54/IP65,9k RPM
Product weight: 3.97 lb(US) (1.8 kg)
IP degree of protection: IP54 (shaft bushing without shaft seal ring) conforming to EN/IEC 60034-5, IP65 (motor) conforming to EN/IEC 60034-5, IP65 (shaft bushing) conforming to EN/IEC 60034-5
Device short name: SH3.....P
Mounting support: International standard flange
Electrical connection: Rotatable right angled connector
[Us] rated supply voltage: 115...480 V
Category: 18359 - PACDRIVE3 SERVO MOTORS
Returnability: N
Country of origin: DE
Length: 6.95 in (176.5 mm)
Holding brake: Without
Encoder type: Absolute single turn SinCos Hiperface
Range compatibility: PacDrive 3
Maximum mechanical speed: 9000 rpm
Product or component type: Servo motor
Discount Schedule: PC52
Phase: Three phase
Nbr. of units in pkg.: 1
Continuous stall current: 1.7 A
Package weight(Lbs): 4
Continuous stall torque: 10.62 lbf.in (1.2 N.m) at 115...480 V three phase
Peak stall torque: 30.97 lbf.in (3.5 N.m) at 115...480 V three phase
Nominal output power: 880 W at 400 V three phase, 970 W at 480 V three phase, 240 W at 115 V three phase, 460 W at 230 V three phase

Nominal torque: 9.73 lbf.in (1.1 N.m) at 230 V three phase, 9.12 lbf.in (1.03 N.m) at 480 V three phase, 10 lbf.in (1.13 N.m) at 115 V three phase, 9.29 lbf.in (1.05 N.m) at 400 V three phase
Nominal speed: 2000 rpm at 115 V three phase, 8000 rpm at 400 V three phase, 9000 rpm at 480 V three phase, 4000 rpm at 230 V three phase
maximum current Irms: 6.5 A
Shaft end: Parallel key
Shaft diameter: 0.35 in (9 mm)
Shaft length: 0.79 in (20 mm)
Key width: 0.12 in (3 mm)
Speed feedback resolution: 128 periods
Holding torque: 7.08 lbf.in (0.8 N.m)
Motor flange size: 2.17 in (55 mm)
Torque constant: 0.7 N.m/A at 248 F (120 C)
Back emf constant: 41 V/krpm at 68 F (20 C)
Number of motor poles: 3
Rotor inertia: 0.134 kg.cm
Stator resistance: 10.4 Ohm
Stator inductance: 37.98 mH
maximum radial force Fr: 190 N at 8000 rpm, 200 N at 7000 rpm, 210 N at 6000 rpm, 230 N at 5000 rpm, 240 N at 4000 rpm, 270 N at 3000 rpm, 310 N at 2000 rpm, 390 N at 1000 rpm
maximum axial force Fa: 40 N
Type of cooling: Natural convection
Centring collar diameter: 1.57 in (40 mm)
Centring collar depth: 0.08 in (2 mm)
Number of mounting holes: 4
Mounting holes diameter: 0.22 in (5.5 mm)
Circle diameter of the mounting holes: 2.48 in (63 mm)

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on SH30553P11A2000 . Santa Clara Systems carries 10,327 items from Telemecanique.