ATS48C48Y

Telemecanique - Starter

Current response time:

By 5AM PT on Friday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Starter
Range of product: Altistart 48
IP degree of protection: IP00
Standards: EN/IEC 60947-4-2
Device short name: ATS48
Width: 400 mm
Height: 670 mm
Depth: 300 mm
Operating altitude: <= 1000 m without
[Uc] control circuit voltage: 110 - 15 % to 230 + 10 %, 50/60 Hz
Vibration resistance: 1 gn (f= 13200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60068-2-27
motor power kW: 110 kW at 230 V for severe applications
Relative humidity: 095 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Protection type: Phase failure: line
Product or component type: Soft starter
Product destination: Asynchronous motors
Product specific application: Heavy duty industry and pumps
Power supply voltage: 208...690 V - 15...10 %
Motor power hp: 125 hp at 208 V for severe applications
power dissipation in W: 1172 W for standard applications
Utilisation category: AC-53A
Type of start: Start with torque control (current limited to 5 In)
Icl nominal current: 480 A for connection in the motor supply line for severe applications
Assembly style: With heat sink
Function available: External bypass (optional)
Power supply voltage limits: 177759 V
Power supply frequency: 50...60 Hz - 5...5 %
Power supply frequency limits: 47.5...63 Hz
Device connection: In the motor supply line
Factory setting current: 414 A
Control circuit consumption: 80 W
Discrete output number: 2
Discrete output type: (LO1) logic output 0 V common configurable
Minimum switching current: 10 mA at 6 V DC for relay outputs

Maximum switching current: Logic output 0.2 A at 30 V DC
Discrete input number: 5
Discrete input type: PTC, 750 Ohm at 25 C
Discrete input voltage: 24 V <= 30 V
Discrete input logic: Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Starting current: 0.4...1.3 Icl adjustable
Analogue output type: Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
Communication port protocol: Modbus
Connector type: 1 RJ45
Communication data link: Serial
Physical interface: RS485 multidrop
Transmission rate: 4800, 9600 or 19200 bps
Max nodes number: 31
Marking: CE
Type of cooling: Forced convection
Operating position: Vertical +/- 10 degree
Net weight: 51.4 kg
Motor power range AC-3: 110220 kW at 380440 V 3 phases
Motor starter type: Soft starter
Electromagnetic compatibility: Conducted and radiated emissions level A conforming to IEC 60947-4-2
Product certifications: UL
Noise level: 55 dB
Pollution degree: Level 3 conforming to IEC 60664-1
Ambient air temperature for operation: 4060 C (with current derating of 2 % per C)
Ambient air temperature for storage: -2570 C
Sustainable offer status: Green Premium product
REACh Regulation: REACh Declaration
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
RoHS exemption information: Yes
China RoHS Regulation: China RoHS declaration
Environmental Disclosure: Product Environmental Profile
Circularity Profile: End of Life Information
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATS48C48Y . Santa Clara Systems carries 10,327 items from Telemecanique.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.