ATS22D88S6U

Telemecanique - Softstart

Current response time:

19 Minutes 20 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: Softstart
Range of product: Altistart 22
IP degree of protection: IP20
Standards: EN/IEC 60947-4-2
Width: 145 mm
Height: 295 mm
Depth: 207 mm
Operating altitude: <= 1000 m without
[Uc] control circuit voltage: 110 V - 15...10 % 50/60 Hz
Vibration resistance: 1 gn (f= 13200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60068-2-27
[Us] rated supply voltage: 208...600 V - 15...10 %
Relative humidity: 095 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Protection type: Phase failure: line
Output current: 0.4...1 Icl adjustable
Product or component type: Soft starter
Product destination: Asynchronous motors
Product specific application: Pumps and fans
Component name: ATS22
Network number of phases: 3 phases
Motor power hp: 25 hp 208 V
Factory setting current: 77 A
power dissipation in W: 66 W for standard applications
Utilisation category: AC-53A
Type of start: Start with torque control (current limited to 3.5 In)
IcL starter rating: 88 A for connection in the motor supply line for standard applications
Assembly style: With heat sink
Function available: Internal bypass
Supply voltage limits: 177660 V
Supply frequency: 50...60 Hz - 10...10 %
Network frequency: 45...66 Hz
Device connection: In the motor supply line
Control circuit consumption: 20 W

Discrete output number: 2
Discrete output type: Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Minimum switching current: 100 mA at 12 V DC (relay outputs)
Maximum switching current: 5 A 250 V AC resistive 1 relay outputs
Discrete input number: 3
Discrete input type: (LI1, LI2, LI3) logic, 5 mA 20 kOhm
Discrete input voltage: 110 V <= 121 V
Discrete input logic: Positive logic LI1, LI2, LI3 at State 0: < 20 V and <= 15 mA at State 1: > 79 V, <= 2 mA
Communication port protocol: Modbus
Connector type: 1 RJ45
Communication data link: Serial
Physical interface: RS485 multidrop
Transmission rate: 4800, 9600 or 19200 bps
Installed device: 31
Marking: CE
Type of cooling: Forced convection
Operating position: Vertical +/- 10 degree
Net weight: 12 kg
Electromagnetic compatibility: Conducted and radiated emissions level A conforming to IEC 60947-4-2
Product certifications: UL
Noise level: 45 dB
Pollution degree: Level 2 conforming to IEC 60664-1
Ambient air temperature for operation: -1040 C (without)
Ambient air temperature for storage: -2570 C
Sustainable offer status: Green Premium product
REACh Regulation: REACh Declaration
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
RoHS exemption information: Yes
China RoHS Regulation: China RoHS declaration
Environmental Disclosure: Product Environmental Profile
Circularity Profile: End of Life Information
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATS22D88S6U . Santa Clara Systems carries 10,327 items from Telemecanique.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.