ATS01N106FT

Telemecanique - soft starter for asynchronous motor - ATS01 - 6 A - 110..480V - 0.75..3 KW

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: soft starter for asynchronous motor - ATS01 - 6 A - 110..480V - 0.75..3 KW
Product weight: 0.35 lb(US) (0.16 kg)
Range of product: Altistart 01
IP degree of protection: IP20
Standards: EN/IEC 60947-4-2
Device short name: ATS01
Width: 0.91 in (23 mm)
Height: 3.94 in (100 mm)
Depth: 3.94 in (100 mm)
Operating altitude: <= 3280.84 ft. (1000 m) without derating, > 3280.84 ft. (1000 m) with current derating of 2.2 % per additional 100 m
Tightening torque: 7.08 lbf.in (0.8 N.m)
[Uc] control circuit voltage: 110 V AC +/- 10 % 30 mA, 24 V AC/DC +/- 10 % 25 mA, 240 V AC +/- 10 % 65 mA
Vibration resistance: 1.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6, 1 gn 13...150 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms EN/IEC 60068-2-27
Electrical connection: Cage type connector rigid 1 2.5 mm AWG 14 control circuit, Cage type connector rigid 1 2.5 mm AWG 14 power circuit, Cage type connector rigid 2 1 mm AWG 17 control circuit, Cage type connector rigid 2 1 mm AWG 17 power circuit, Cage type connector flexible with cable end 1 2.5 mm AWG 14 control circuit, Cage type connector flexible with cable end 1 2.5 mm AWG 14 power circuit, Cage type connector flexible without cable end 1 2.5 mm AWG 14 control circuit, Cage type connector flexible without cable end 1 2.5 mm AWG 14 power circuit, Cage type connector flexible with cable end 2 0.75 mm AWG 18 control circuit, Cage type connector flexible with cable end 2 0.75 mm AWG 18 power circuit, Cage type connector flexible without cable end 2 1 mm AWG 17 control circuit, Cage type connector flexible without cable end 2 1 mm AWG 17 power circuit
motor power kW: 3 kW 3 phases 400 V, 0.75 kW 3 phases 230 V, 1.1 kW 3 phases 230 V, 2.2 kW 3 phases 400 V, 0.75 kW 1 phase 230 V
Utilization category: AC-53B EN/IEC 60947-4-2
[Us] rated supply voltage: 110...480 V - 10...10 %
Relative humidity: 5...95 % without condensation or dripping water EN/IEC 60068-2-3
Assembly style: With heat sink
Electromagnetic compatibility: Damped oscillating waves level 3 IEC 61000-4-12, Electrostatic discharge level 3 IEC 61000-4-2, Immunity to electrical transients level 4 IEC 61000-4-4, Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3, Voltage/current impulse level 3 IEC 61000-4-5, Conducted and radiated emissions level B CISPR 11, Conducted and radiated emissions level B IEC 60947-4-2, EMC immunity EN 50082-2, Harmonics IEC 1000-3-2, Harmonics IEC 1000-3-4, Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6, Micro-cuts and voltage fluctuation IEC 61000-4-11, EMC immunity EN 50082-1
Product or component type: Soft starter
Function available: Integrated bypass
Product destination: Asynchronous motors

Supply voltage limits: 99...528 V
Product certifications: UL, GOST, B44.1-96/ASME A17.5 for starter wired to the motor delta terminal, CSA, C-Tick, CCC
Product specific application: Simple machine
Supply frequency: 50...60 Hz - 5...5 %
Network frequency: 47.5...63 Hz
Pollution degree: 2 EN/IEC 60947-4-2
Phase: 1 phase
Output voltage: <= power supply voltage
Starting time: 1 s 100, 5 s 20, Adjustable from 1 to 5 s
Motor power hp: 1 hp 3 phases 230 V, 2 hp 3 phases 460 V, 3 hp 3 phases 460 V, 0.5 hp 3 phases 210 V, 1.5 hp 3 phases 230 V
Starting torque: 30...80 % of starting torque of motor connected directly on the line supply
Ambient air temperature for operation: 14...104 F (-10...40 C) without derating, 104...122 F (40...50 C) with current derating of 2 % per C
IcL starter rating: 6:00 AM
Discrete output current: 2 A DC-13, 3 A AC-15
Ambient air temperature for storage: -13...158 F (-25...70 C) EN/IEC 60947-4-2
Current consumption: 30 A at nominal load
Type of start: Start with voltage ramp
Marking: CE
power dissipation in W: 1 W at full load and at end of starting, 31 W in transient state
Operating position: Vertical +/- 10 degree
Compatibility code: ATS01N1
Power range: 0.55...1 kW at 200...240 V 1 phase, 2.2...3 kW at 380...440 V 3 phases, 0.55...1 kW at 200...240 V 3 phases, 1.1...2 kW at 380...440 V 3 phases, 1.1...2 kW at 200...240 V 3 phases
Motor starter type: Soft starter

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATS01N106FT . Santa Clara Systems carries 10,327 items from Telemecanique.