SZ-01S

Keyence - Safety Laser Scanner

Current response time:

19 Minutes 33 Seconds

Description: Safety Laser Scanner
Weight: Approx. 1.6 kg
Footnotes: *1 20% or more reflectance is necessary for the minimum detectable object in the warning zone. *2 If there is a high reflective background within 1.5 m 4.921' from the boundary of the protection zone, 200 mm 7.87" must be added as supplementary necessary distance to the protection zone in case of calculation of the minimum safety distance. *3 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *4 For the load current calculation of the OSSD output and the AUX output, make sure it is 1.5 A or less when using converter power supply (or 1.0 A or less when the cable length is 25 m 82.02' or more), and 1.0 A or less when using a battery (or 0.5 A or less when the cable length is 5 m 16.40' or more) *5 This also takes into account the situations when power is either off or disconnected. *6 The wiring resistance between the OSSD output and the connected equipment (excluding the resistance of the cable) must be 2.5 - or less to ensure operation. However, it must be 1.0 - or less if the load current is 300 mA or more. *7 It must be 10 m 32.81' or less if the power is supplied by battery. *8 When the setting cover is open, or the connector cable is not connected, the IP65 certification cannot be met. In addition, the SZ-16D doesn't fulfill the requirements of IP65 degree of protection with the connector cable for the RS-422A communication unattached.. *9 The SZ should not be installed so as to have light interference within 5 to the detection plane.
Type: Simple function type
Cable length: 30 m 98.43' or less *7
Detection capability - Minimum detectable object size: Diameter 30 mm 1.18"/40 mm 1.58", 50 mm 1.97", 70 mm 2.76", 150 mm 5.91" (depends on the setting) Reflectance 1.8% min., Speed 1.6 m/s 5.25 ft/s max.
Detection capability - Detectable angle: 270 (-45 to 225)
Detection capability - Response time (ON to OFF) - General scan cycle (Scan cycle A): 60 ms (2 scans) to 480 ms (16 scans)
Detection capability - Response time (ON to OFF) - Specific scan cycle (Scan cycle B): 66 ms (2 scans) to 528 ms (16 scans)
Detection capability - Response time (OFF to ON) - General scan cycle (Scan cycle A): Response time of ON to OFF +125 ms
Detection capability - Response time (OFF to ON) - Specific scan cycle (Scan cycle B): Response time of ON to OFF +125 ms
Detection capability - Max. protection zone - Minimum detectable object size: 70 mm 2.76"/150 mm 5.91": 4.2 m 13.78' (-5 to 185), 2.8 m 9.19' (-45 to -5, 185 to 225)
Detection capability - Max. protection zone - Minimum detectable object size: 50 mm 1.97": 3.0 m 9.84' (-5 to 185), 2.0 m 6.56' (-45 to -5, 185 to 225)
Detection capability - Max. protection zone - Minimum detectable object size: 40 mm 1.58": 2.4 m 7.87' (-5 to 185), 1.6 m 5.25' (-45 to -5, 185 to 225)
Detection capability - Max. protection zone - Minimum detectable object size: 30 mm 1.18": 1.8 m 5.91' (-5 to 185), 1.2 m 3.94' (-45 to -5, 185 to 225)
Detection capability - Max. warning zone (non safety related) - Minimum detectable object size: 70 mm 2.76"/150 mm 5.91": 10.0 m 32.18' (-5 to 185), 7.0 m 22.97' (-45 to -5, 185 to 225)*1
Detection capability - Max. warning zone (non safety related) - Minimum detectable object size: 50 mm 1.97": 7.5 m 24.61' (-5 to 185), 5.0 m 16.4' (-45 to -5, 185 to 225)*1
Detection capability - Max. warning zone (non safety related) - Minimum detectable object size: 40 mm 1.58": 6.0 m 19.69' (-5 to 185), 4.0 m 13.12' (-45 to -5, 185 to 225)*1
Detection capability - Max. warning zone (non safety related) - Minimum detectable object size: 30 mm 1.18": 4.5 m 14.76' (-5 to 185), 3.0 m 9.84' (-45 to -5, 185 to 225)*1
Detection capability - Additional safety distance: 100 mm 3.94"*2
Light source - Type, wavelength: Infrared laser diode, 905 nm
Light source - Laser class: Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10 *3)
OSSD output - Output: PNP or NPN (Selectable according to the connector cable) 2 outputs
OSSD output - Max. load current: 500 mA*4
OSSD output - Residual voltage (during ON): Max. 2.5 V (with a cable length of 5 m 16.4')

OSSD output - OFF-state voltage: Max. 2.0 V (with a cable length of 5 m 16.4')
OSSD output - Leakage current: Max. 1 mA*5
OSSD output - Max. capacitive load: 2.2 F (with a load resistance of 100?)
OSSD output - Load wiring resistance: Max. 2.5?*6
Input (safety-related) - Input resistance: 4.4 k? (for Input 1) 2.2 k? (for Input 2)
Non safety-related output (AUX output) - Output: PNP/NPN totem pole output 2 outputs
Non safety-related output (AUX output) - Max. load current: 50 mA
Non safety-related output (AUX output) - Residual voltage (during ON): Max. 2.5 V (with a cable length of 5 m 16.4')
Muting lamp output - (AUX6 output can be assigned for the muting lamp output): -
Approved standards - EMC - EMS: IEC61496-1, EN61496-1, UL 61496-1
Approved standards - EMC - EMI: EN55011 Class A, FCC Part15B Class A
Approved standards - Safety: IEC61496-1, EN61496-1, UL 61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061 (SIL2), EN ISO13849-1:2015 (PL d, Category 3) UL508, UL1998
Rating - Power voltage: 24 VDC 10% (Ripple P-P 10% or less): When using a converter power supply 24 VDC +20%/-30%: When using a battery
Rating - Power consumption: Max. 9.5 W (without load) Max. 39 W (with load)
Environmental resistance - Enclosure rating: IP65 (IEC60529)*8
Environmental resistance - Ambient temperature: -10 to +50C 14 to 122F, No freezing
Environmental resistance - Ambient temperature for storage: -25 to +60C -13 to 140F, No freezing
Environmental resistance - Relative humidity: 35 to 85% RH (No condensation)
Environmental resistance - Storage relative humidity: 35 to 95% RH
Environmental resistance - Operating ambient luminance: Incandescent lamp: 1500 lx or less*9
Environmental resistance - Vibration: 10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in X, Y, and Z directions
Environmental resistance - Shock resistance: 100 m/s2 (Approx. 10 G) 16 ms pulse in X, Y, Z directions, 1000 times each axis
Material - Main unit case: Aluminum die casting, SPHC (Bottom)
Material - Window: Polycarbonate

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on SZ-01S . Santa Clara Systems carries 2,105 items from Keyence.

We are in the process of adding data and downloadable material for this item. Please search similar items for more information related to this product.