Out of Stock

Telemecanique LD4LD030MC TeSys Integral - contactor breaker - 63 A A AC-43 - 230...240 V AC coil Product Image

LD4LD030MC

Telemecanique - TeSys Integral - contactor breaker - 63 A A AC-43 - 230...240 V AC coil

Current response time:

13 Minutes 50 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: TeSys Integral - contactor breaker - 63 A A AC-43 - 230...240 V AC coil
Product weight: 26.68 lb(US) (12.1 kg)
Range of product: TeSys D
IP degree of protection: IP2x front face conforming to IEC 60529
Standards: IEC 60947-4-1, IEC 60947-5-1, UL 508, EN 60947-4-1, CSA C22.2 No 14, EN 60947-5-1
Device short name: LC3D
Width: 17.72 in (450 mm)
Height: 21.85 in (555 mm)
Depth: 8.07 in (205 mm)
Protective treatment: TH conforming to IEC 60068-2-30
[Ui] rated insulation voltage: 600 V certifications CSA power circuit, 600 V certifications UL power circuit, 600 V certifications CSA signaling circuit, 600 V certifications UL signaling circuit, 1000 V conforming to IEC 60947-4-1 power circuit, 1000 V conforming to IEC 60947-1 signaling circuit
[Uimp] rated impulse withstand voltage: 8 kV conforming to IEC 60947
Operating altitude: 9842.52 ft. (3000 m) without derating in temperature
Mechanical durability: 8 Mcycles
Tightening torque: 106.19 lbf.in (12 N.m) power circuit connector flat 6...8 mm, 10.62 lbf.in (1.2 N.m)for control circuit connector flat 6 mm, 10.62 lbf.in (1.2 N.m)for control circuit connector Philips No 2
Connections - terminals: Connector power circuit 1 0.02...0.19 in (10...120 mm) flexible without cable end, Connector power circuit 2 0.02...0.08 in (10...50 mm) flexible without cable end, Connector power circuit 1 0.02...0.19 in (10...120 mm) flexible with cable end, Connector power circuit 2 0.02...0.08 in (10...50 mm) flexible with cable end, Connector power circuit 1 0.02...0.19 in (10...120 mm) solid without cable end, Connector power circuit 2 0.02...0.08 in (10...50 mm) solid without cable end, Connector for control circuit 1 0...0 in (1...2.5 mm) flexible without cable end, Connector for control circuit 2 0...0 in (1...2.5 mm) flexible without cable end, Connector for control circuit 1 0...0 in (1...2.5 mm) flexible with cable end, Connector for control circuit 2 0...0 in (1...2.5 mm) flexible with cable end, Connector for control circuit 1 0...0 in (1...2.5 mm) solid without cable end, Connector for control circuit 2 0...0 in (1...2.5 mm) solid without cable end
Range: TeSys
Mounting support: Plate
System Voltage: <= 690 V AC 25...400 Hz power circuit
Operating rate: 30 cyc/hat <= 140 F (60 C)
Product name: TeSys D
[Uc] control circuit voltage: 110 V AC 50/60 Hz
Electrical durability: 0.95 Mcycles 115 A AC-3 <= 440 V
Insulation resistance: > 10 MOhm signaling circuit
motor power kW: 110 kW at 380/400 V AC 50/60 Hz, 110 kW at 415 V AC 50/60 Hz, 110 kW at 440 V AC 50/60 Hz, 63 kWat 220/230 V AC 50/60 Hz
[Ie] rated operational current: 115 A (<= 140 F (60 C)) AC AC-3for power circuit at <= 440 V
Utilization category: AC-3

Control circuit voltage limits: 0.3...0.5 Uc at 131 F (55 C) drop-out 50/60 Hz, 0.8...1.15 Uc at 131 F (55 C) operational 50/60 Hz
Poles description: 3 x 3P
Overvoltage category: III
Control circuit type: AC 50/60 Hz
Product or component type: Star delta starter
Pollution degree: 3
Starting time: 30 s
Ambient air temperature for storage: -76...176 F (-60...80 C)
Contactor application: Motor control
Coil technology: Without built-in suppressor module
Ambient air temperature for operation: -40...158 F (-40...70 C) at Uc
Device presentation: Pre-wired
inrush power in VA: 280...350 VAat 68 F (20 C) 0.8 60 Hz, 280...350 VAat 68 F (20 C) 0.8 50 Hz
Fire resistance: 1562 F (850 C) conforming to IEC 60695-2-1
hold-in power consumption in VA: 2...18 VAat 68 F (20 C) 0.3 60 Hz, 2...18 VAat 68 F (20 C) 0.3 50 Hz
Flame retardance: V1 conforming to UL 94
Pole contact composition: 3 x 3 NO
Heat dissipation: 3...8 W at 50/60 Hz
Mechanical robustness: Vibrations contactor open 2 Gn, 5...300 Hz, Vibrations contactor closed 4 Gn, 5...300 Hz, Shocks contactor closed 15 Gn for 11 ms, Shocks contactor open 6 Gn for 11 ms
Auxiliary contacts type: Mechanically linked conforming to IEC 60947-5-1 3 x 1 NO + 1 NC, Mirror contact conforming to IEC 60947-4-1 3 x 1 NC
Signaling circuit frequency: 25...400 Hz
Minimum switching current: For signaling circuit
Switching voltage: 17 Vfor signaling circuit
Non-overlap time: 1.5 ms on energisation between NC and NO contact, 1.5 ms on de-energisation between NC and NO contact
Auxiliary contact composition: 1 NC KM2 line contactor, 1 NO KM3 delta contactor
Interlocking type: Mechanical
Product certifications: CSA, LROS (Lloyds register of shipping), RINA, BV, GOST, DNV, GL, CCC, UL

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on LD4LD030MC . Santa Clara Systems carries 10,400 items from Telemecanique.