ATV71H075N4Z

Telemecanique - variable speed drive ATV71 - 0.75kW-1HP - 480V - EMC filter-w/o graphic terminal

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive ATV71 - 0.75kW-1HP - 480V - EMC filter-w/o graphic terminal
Product weight: 6.61 lb(US) (3 kg)
Range of product: Altivar 71
IP degree of protection: IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529, IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1, IP21 conforming to EN/IEC 60529, IP21 conforming to EN/IEC 61800-5-1, IP41 on upper part conforming to EN/IEC 60529, IP41 on upper part conforming to EN/IEC 61800-5-1, IP54 on lower part conforming to EN/IEC 60529, IP54 on lower part conforming to EN/IEC 61800-5-1
Standards: EN 61800-3 environments 2 category C2, EN/IEC 61800-5-1, EN 61800-3 environments 1 category C2, EN 55011 class A group 1, EN/IEC 61800-3, UL Type 1, IEC 60721-3-3 class 3S2, IEC 60721-3-3 class 3C1
Width: 5.12 in (130 mm)
Height: 9.06 in (230 mm)
Depth: 6.89 in (175 mm)
Operating altitude: <= 3280.84 ft. (1000 m) without derating, 3280.84...9842.52 ft. (1000...3000 m) with current derating 1 % per 100 m
Tightening torque: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m), L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 12.39 lbf.in (1.4 N.m) / 12.3 lb.in
Vibration resistance: 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6, 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms conforming to EN/IEC 60068-2-27
Electrical connection: AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm / AWG 14, L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 4 mm / AWG 10
Insulation resistance: > 1 mOhm at 500 V DC for 1 minute to earth
motor power kW: 0.75 kWat 380...480 V 3 phases
[Us] rated supply voltage: 380...480 V (- 15...10 %)
Relative humidity: 5...95 % without condensation conforming to IEC 60068-2-3, 5...95 % without dripping water conforming to IEC 60068-2-3
Protection type: Drive against exceeding limit speed, Drive against input phase loss, Drive break on the control circuit, Drive input phase breaks, Drive line supply overvoltage, Drive line supply undervoltage, Drive overcurrent between output phases and earth, Drive overheating protection, Drive overvoltages on the DC bus, Drive short-circuit between motor phases, Drive thermal protection, Motor motor phase break, Motor power removal, Motor thermal protection
Response time: <= 100 ms in STO (Safe Torque Off), AO1 2 ms, tolerance +/- 0.5 ms analog output(s), R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms discrete output(s), R2A, R2B 7 ms, tolerance +/- 0.5 ms discrete output(s)
Switching frequency: 1...16 kHz adjustable, 4...16 kHz with derating factor
Product destination: Asynchronous motors, Synchronous motors
Noise level: 43 dB conforming to 86/188/EEC
Product or component type: Variable speed drive
Supply voltage limits: 323...528 V
Dielectric strength: 3535 V DC between earth and power terminals, 5092 V DC between control and power terminals
Product specific application: Complex, high-power machines
Supply frequency: 50...60 Hz (- 5...5 %)
Electromagnetic compatibility: Conducted radio-frequency immunity test conforming to IEC 61000-4-6 level 3, Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4, Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3, Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3, Voltage dips and interruptions immunity test conforming to IEC 61000-4-11, 1.2/50 s - 8/20 s surge immunity test conforming to IEC 61000-4-5 level 3
Component name: ATV71
Network frequency: 47.5...63 Hz
Speed range: 1...100 asynchronous motor in open-loop mode, without speed feedback, 1...50 synchronous motor in open-loop mode, without speed feedback, 1...1000 asynchronous motor in closed-loop mode with encoder feedback
Product certifications: NOM 117, CSA, C-Tick, UL, GOST
Motor power hp: 1 hpat 380...480 V 3 phases
Speed accuracy: +/- 0.01 % of nominal speed 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback, +/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
Pollution degree: 2 conforming to EN/IEC 61800-5-1
Motor cable length: <= 328.08 ft. (100 m) Unshielded cable, <= 164.04 ft. (50 m) Shielded cable
Torque accuracy: +/- 15 % in open-loop mode, without speed feedback, +/- 5 % in closed-loop mode with encoder feedback
Transient overtorque: 220 % of nominal motor torque +/- 10 %for 2 s, 170 % of nominal motor torque +/- 10 %for 60 s every 10 minutes
Phase: 3 phases
Braking torque: <= 150 % with braking or hoist resistor, 30 % without braking resistor
Line current: 3 Afor 480 V 3 phases 0.75 kW / 1 hp, 3.7 Afor 380 V 3 phases 0.75 kW / 1 hp
Synchronous motor control profile: Vector control without speed feedback
EMC filter: Integrated
Regulation loop: Adjustable PI regulator
Ambient air temperature for operation: 14...122 F (-10...50 C) without derating

Assembly style: With heat sink
Motor slip compensation: Suppressible, Not available in voltage/frequency ratio (2 or 5 points), Automatic whatever the load, Adjustable
Ambient air temperature for storage: -13...158 F (-25...70 C)
Variant: Without remote graphic terminal
Local signaling: 1 LED red presence of drive voltage
Apparent power: 2.4 kVAat 380 V 3 phases 0.75 kW / 1 hp
Output voltage: <= power supply voltage
prospective line Isc: <= 5 kA, 3 phases
Insulation: Electrical between power and control
Nominal output current: 2.1 A at 4 kHz 460 V 3 phases 0.75 kW / 1 hp, 2.3 A at 4 kHz 380 V 3 phases 0.75 kW / 1 hp
Type of cable: With a NEMA Type1 kit: 3-strand UL 508 cableat 104 F (40 C), copper 75 C PVC, With an IP21 or an IP31 kit: 3-strand IEC cableat 104 F (40 C), copper 70 C PVC, Without mounting kit: 1-strand IEC cableat 113 F (45 C), copper 70 C PVC, Without mounting kit: 1-strand IEC cableat 113 F (45 C), copper 90 C XLPE/EPR
Maximum transient current: 3.5 Afor 60 s 3 phases 0.75 kW / 1 hp, 3.8 Afor 2 s 3 phases 0.75 kW / 1 hp
Output frequency: 0.1...599 Hz
Nominal switching frequency: 4 kHz
Supply: Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mA for overload and short-circuit protection, Internal supply, 24 V DC, voltage limits 21...27 V, <= 200 mA for overload and short-circuit protection
Analogue input number: 2
Asynchronous motor control profile: Voltage/frequency ratio (2 or 5 points), Flux vector control (FVC) with sensor (current vector), Sensorless flux vector control (SFVC) (voltage or current vector), ENA (Energy adaptation) system for unbalanced loads
Analogue input type: AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign, AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits, AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
Type of polarization: No impedance Modbus
Sampling duration: AI1-/Al1+ 2 ms, +/- 0.5 ms analog input(s), Al2 2 ms, +/- 0.5 ms analog input(s), LI1...LI5 2 ms, +/- 0.5 ms discrete input(s), LI6 (if configured as logic input) 2 ms, +/- 0.5 ms discrete input(s)
Accuracy: AI1-/Al1+ +/- 0.6 % for a temperature variation 60 C, AI2 +/- 0.6 % for a temperature variation 60 C, AO1 +/- 1 % for a temperature variation 60 C
Linearity error: AI1-/Al1+, AI2 +/- 0.15 % of maximum value, AO1 +/- 0.2 %
Analogue output number: 1
Analogue output type: AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits, AO1 software-configurable logic output 10 V <= 20 mA, AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
Discrete output number: 2
Discrete output type: R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles, R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
Minimum switching current: Configurable relay logic 3 mAat 24 V DC
Maximum switching current: R1, R2 on resistive load, 5 A at 250 V AC, cos phi = 1,, R1, R2 on resistive load, 5 A at 30 V DC, cos phi = 1,, R1, R2 on inductive load, 2 A at 250 V AC, cos phi = 0.4,, R1, R2 on inductive load, 2 A at 30 V DC, cos phi = 0.4,
Discrete input number: 7
Discrete input type: LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm, PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d, LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm, LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm
Discrete input logic: LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0), LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0), LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0), LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
Acceleration and deceleration ramps: Linear adjustable separately from 0.01 to 9000 s, Automatic adaptation of ramp if braking capacity exceeded, by using resistor, S, U or customized
Braking to standstill: By DC injection
Frequency resolution: Analog input 0.024/50 Hz, Display unit 0.1 Hz
Communication port protocol: CANopen, Modbus
Connector type: 1 RJ45 Modbus on front face, 1 RJ45 Modbus on terminal, Male SUB-D 9 on RJ45 CANopen
Physical interface: 2-wire RS 485 Modbus
Transmission frame: RTU Modbus
Transmission rate: 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps CANopen, 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus on terminal, 9600 bps, 19200 bps Modbus on front face
Data format: 8 bits, 1 stop, even parity Modbus on front face, 8 bits, odd even or no configurable parity Modbus on terminal
Number of addresses: 1...247 Modbus, 1...127 CANopen
Method of access: Slave CANopen
Marking: CE
Operating position: Vertical +/- 10 degree
Option card: CC-Link communication card, Controller inside programmable card, DeviceNet communication card, Ethernet/IP communication card, Fipio communication card, I/O extension card, Interbus-S communication card, Interface card for encoder, Modbus Plus communication card, Modbus TCP communication card, Modbus/Uni-Telway communication card, Overhead crane card, Profibus DP communication card, Profibus DP V1 communication card

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV71H075N4Z . Santa Clara Systems carries 10,327 items from Telemecanique.