RM35JA32MW

Telemecanique - current control relay RM35-J - range 0.15..1.5 A

Current response time:

15 Minutes 6 Seconds

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: current control relay RM35-J - range 0.15..1.5 A
Product weight: 0.29 lb(US) (0.13 kg)
Range of product: Zelio Control
IP degree of protection: IP20(terminals) conforming to IEC 60529, IP30 (casing) conforming to IEC 60529
Standards: EN/IEC 60255-6
Width: 1.38 in (35 mm)
[Ui] rated insulation voltage: 250 V conforming to IEC 60664-1
Mechanical durability: 30000000 cycles
Tightening torque: 5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1
Connections - terminals: Screw terminals 1 x 0.5...1 x 4 mm - AWG 20...AWG 11, solid cable without cable end, Screw terminals 2 x 0.5...2 x 2.5 mm - AWG 20...AWG 14, solid cable without cable end, Screw terminals 1 x 0.2...1 x 2.5 mm - AWG 24...AWG 12, flexible cable with cable end, Screw terminals 2 x 0.2...2 x 1.5 mm - AWG 24...AWG 16, flexible cable with cable end
Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Operating rate: <= 360 operations/hour under full load
Vibration resistance: 0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6, 1 gn (f = 57.6...150 Hz) conforming to IEC 60255-21-1
Shock resistance: 15 gn 11 ms conforming to IEC 60255-21-1
Electrical durability: 100000 cycles
Insulation resistance: > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5, > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1, > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5, > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
Utilization category: AC-12 conforming to IEC 60947-5-1, AC-13 conforming to IEC 60947-5-1, AC-14 conforming to IEC 60947-5-1, AC-15 conforming to IEC 60947-5-1, DC-12 conforming to IEC 60947-5-1, DC-13 conforming to IEC 60947-5-1, DC-14 conforming to IEC 60947-5-1
Control circuit voltage limits: - 15 % + 10 % Un
[Us] rated supply voltage: 24...240 V AC/DC, 50/60 Hz +/- 10 %
Overvoltage category: III conforming to IEC 60664-1
Relative humidity: 95 % at 131 F (55 C) conforming to IEC 60068-2-30
Housing material: Self-extinguishing plastic
Dielectric test voltage: 2 kV AC 50 Hz, 1 min conforming to IEC 60255-5, 2 kV AC 50 Hz, 1 min conforming to IEC 60664-1
Reset time: 1500 ms time delay
Immunity to micro breaks: 50 ms
Product or component type: Modular measurement and control relays
Maximum switching voltage: 250 V AC/DC
Electromagnetic compatibility: Emission standard for industrial environments conforming to EN/IEC 61000-6-4, Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3, Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Relay type: Current control relay
Relay name: RM35JA
Supply voltage limits: 20.4...264 V AC/DC

Product certifications: C-Tick, GL, UL, GOST, CSA
Relay monitored parameters: Overcurrent or undercurrent detection
Ambient air temperature for storage: -40...158 F (-40...70 C)
Time delay type: Adjustable 1...20 s, 0 + 10 % on energisation Ti, Adjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt
power consumption in W: <= 0.6 W DC
Ambient air temperature for operation: -4...122 F (-20...50 C)
switching capacity in VA: 1250 VA
Control circuit frequency: 40...70 Hz +/- 10 %
Minimum switching current: 10 mA at 5 V DC
Resistance across terminals: 0.005 Ohm E3-M terminals, 0.015 Ohm E2-M terminals, 0.05 Ohm E1-M terminals
Maximum switching current: 5 A AC/DC
Output contacts: 2 C/O
power consumption in VA: <= 3.5 VA AC
Nominal output current: 5:00 AM
Measurement range: 0.15...1.5 A E1-M terminals, 0.5...5 A E2-M terminals, 1.5...15 A E3-M terminals, 150 mA...15 A current
Measuring cycle: <= 30 ms measurement cycle as true rms value
Pollution degree: 3 conforming to IEC 60664-1
Hysteresis: 5...50 % of threshold setting
Run-up delay at power-up: 0.3 s
Non-dissipating shock wave: 4 kV conforming to IEC 60255-5, 4 kV conforming to IEC 60664-1, 4 kV conforming to IEC 61000-4-5
Measurement accuracy: +/- 10 % of the full scale value
Repeat accuracy: +/- 0.5 % input and measurement circuit, +/- 2 % time delay
Measurement error: 0.05 %/C with temperature variation, 1 by volt over the whole range with voltage variation
Polarity: No DC
Threshold setting: 10...100 %
Marking: CE : EMC 89/336/EEC, CE : 73/23/EEC
Operating position: Any position without derating
Local signaling: LED green power ON, LED yellow relay ON
Safety reliability data: MTTFd = 296.8 years, B10d = 270000
Contacts material: Cadmium free

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on RM35JA32MW . Santa Clara Systems carries 10,327 items from Telemecanique.