ATV630U55M3

Telemecanique - variable speed drive ATV630 - 5.5kW/7.5HP - 200...240V - IP21/UL type 1

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive ATV630 - 5.5kW/7.5HP - 200...240V - IP21/UL type 1
Product weight: 16.98 lb(US) (7.7 kg)
Range of product: Altivar Process ATV600
IP degree of protection: IP21
Standards: EN/IEC 61800-3, EN/IEC 61800-3 environment 1 category C2, EN/IEC 61800-3 environment 2 category C3, UL 508C, EN/IEC 61800-5-1, IEC 61000-3-12, IEC 60721-3, IEC 61508, IEC 13849-1
Device short name: ATV630
Width: 6.81 in (173 mm)
Height: 15.94 in (405 mm)
Depth: 9.09 in (231 mm)
Operating altitude: 1000...4800 m with current derating 1 % per 100 m, <= 3280.84 ft. (1000 m) without derating
Vibration resistance: 1.5 mm peak to peak 2...13 Hz IEC 60068-2-6, 1 gn 13...200 Hz IEC 60068-2-6
Shock resistance: 15 gn 11 ms IEC 60068-2-27
Electrical connection: Removable screw terminals 0.5...1.5 mm AWG 20...AWG 16 control, Screw terminal 10 mm AWG 8 motor, Screw terminal 6 mm AWG 10 line side
Insulation resistance: > 1 MOhm 500 V DC for 1 minute to earth
motor power kW: 5.5 kW normal duty, 4 kW heavy duty
[Us] rated supply voltage: 200...240 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-3
Protection type: Safe torque off motor, Motor phase break motor, Safe torque off drive, Overheating drive, Short-circuit protection drive, Motor phase break drive, Overspeed drive, Break on the control circuit drive, Overvoltages on the DC bus drive, Overload of output voltage drive, Line supply overvoltage drive, Line supply phase loss drive, Line supply undervoltage drive, Overcurrent between output phases and earth drive, Thermal protection motor, Thermal protection drive
Switching frequency: 2...12 kHz adjustable, 4...12 kHz with derating factor
Degree of protection: UL type 1 UL 508C
Output voltage: <= power supply voltage
Product or component type: Variable speed drive
Permissible temporary current boost: 1.1 x In 60 s normal duty, 1.5 x In 60 s heavy duty
Noise level: 56 dB 86/188/EEC
Product specific application: Process and utilities
Motor slip compensation: Adjustable, Not available in permanent magnet motor law, Can be suppressed, Automatic whatever the load
power dissipation in W: 47 W natural convection 200 V 4 kHz, 179 W forced convection 200 V 4 kHz
Acceleration and deceleration ramps: S, U or customized, Linear adjustable separately from 0.01 to 9000 s
Volume of cooling air: 27210.21 Gal/hr(US) (103 m3/h)
Variant: Standard version
Braking to standstill: By DC injection
Operating position: Vertical +/- 10 degree
Product destination: Synchronous motors, Asynchronous motors
THDI: <= 48 % from 80...100 % of load IEC 61000-3-12
Mounting mode: Wall mount
Frequency resolution: Display unit, Analog input
Electromagnetic compatibility: Conducted radio-frequency immunity test level 3 IEC 61000-4-6, 1.2/50 s - 8/20 s surge immunity test level 3 IEC 61000-4-5, Electrical fast transient/burst immunity test level 4 IEC 61000-4-4, Electrostatic discharge immunity test level 3 IEC 61000-4-2, Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
EMC filter: Without EMC filter
Pollution degree: 2 EN/IEC 61800-5-1
Connector type: RJ45 Ethernet/Modbus TCP on the remote graphic terminal, RJ45 Modbus serial on the remote graphic terminal
Physical interface: 2-wire RS 485 Modbus serial
Type of cooling: Forced convection
Transmission frame: RTU Modbus serial
Supply frequency: 50...60 Hz - 5...5 %
Transmission rate: 10/100 Mbit/s Ethernet IP/Modbus TCP, 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Ambient air temperature for operation: 5...122 F (-15...50 C) without derating, 122...140 F (50...60 C) with derating factor

Network number of phases: 3 phases
Exchange mode: Half duplex, full duplex, auto negotiation Ethernet/Modbus TCP
Ambient air temperature for storage: -40...158 F (-40...70 C)
Data format: 8 bits, configurable odd, even or no parity Modbus serial
Type of polarization: No impedance Modbus serial
Environmental characteristic: Chemical pollution resistance class 3C3 EN/IEC 60721-3-3, Dust pollution resistance class 3S3 EN/IEC 60721-3-3
Motor power hp: 7.5 hp normal duty, 5 hp heavy duty
Number of addresses: 1...247 Modbus serial
Line current: 20.2 A 200 V normal duty, 17.1 A 240 V normal duty, 15.1 A 200 V heavy duty, 13 A 240 V heavy duty
Method of access: Slave Modbus TCP
Product certifications: DNV-GL, TV, ATEX zone 2/22, ATEX INERIS, UL, REACH, CSA
prospective line Isc: 50 kA
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 mA overload and short-circuit protection, External supply for digital inputs 24 V DC 19...30 V <= 1.25 mA overload and short-circuit protection, Internal supply for digital inputs and STO 24 V DC 21...27 V <= 200 mA overload and short-circuit protection
Marking: CE
Apparent power: 7.1 kVA 240 V normal duty, 5.4 kVA 240 V heavy duty
Local signaling: 3 LEDs local diagnostic, 3 LEDs dual color embedded communication status, 4 LEDs dual color communication module status, 1 LED red presence of voltage
Continuous output current: 25.4 A 4 kHz normal duty, 18.7 A 4 kHz heavy duty
Maximum transient current: 27.9 A 60 s normal duty, 28.1 A 60 s heavy duty
Asynchronous motor control profile: Constant torque standard, Optimized torque mode, Variable torque standard
Synchronous motor control profile: Permanent magnet motor
Output frequency: 0.0001...0.5 kHz
Analogue input number: 3
Nominal switching frequency: 4 kHz
Analogue input type: Software-configurable voltage AI1, AI2, AI3 0...10 V DC 30 kOhm 12 bits, Software-configurable current AI1, AI2, AI3 0...20 mA/4...20 mA 250 Ohm 12 bits
Discrete input number: 8
Safety function: STO (safe torque off) SIL 3
Discrete input type: Programmable DI1...DI6 24 V DC 3.5 kOhm, Programmable as pulse input DI5, DI6 0...30 kHz 24 V DC, Safe torque off STOA, STOB 24 V DC > 2.2 kOhm
Discrete input logic: Positive logic (source) DI1...DI6 < 5 V > 11 V, Negative logic (sink) DI1...DI6 > 16 V < 10 V, Positive logic (source) DI5, DI6 < 0.6 V > 2.5 V, Positive logic (source) STOA, STOB < 5 V > 11 V
Input compatibility: Level 1 PLC EN/IEC 61131-2 DI1...DI6 discrete input, Level 1 PLC IEC 65A-68 DI5, DI6 discrete input, Level 1 PLC EN/IEC 61131-2 STOA, STOB discrete input
Communication port protocol: Ethernet, Modbus serial, Modbus TCP
Option card: Communication module Profibus DP V1 slot A, Communication module Profinet slot A, Communication module DeviceNet slot A, Communication module Modbus TCP/Ethernet/IP slot A, Communication module CANopen daisy chain RJ45 slot A, Communication module CANopen SUB-D 9 slot A, Communication module CANopen screw terminals slot A, Digital and analog I/O extension module slot A/slot B, Output relay extension module slot A/slot B, Communication module Ethernet IP/Modbus TCP/MD-Link slot A
Analogue output number: 2
Analogue output type: Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits, Software-configurable current AO1, AO2 0...20 mA 10 bits
Sampling duration: 2 ms +/- 0.5 ms DI1...DI4 discrete input, 5 ms +/- 1 ms DI5, DI6 discrete input, 5 ms +/- 0.1 ms AI1, AI2, AI3 analog input, 10 ms +/- 1 ms AO1 analog output
Accuracy: +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 C analog input, +/- 1 % AO1, AO2 for a temperature variation 60 C analog output
Linearity error: +/- 0.15 % of maximum value analog input AI1, AI2, AI3, +/- 0.2 % analog output AO1, AO2
Relay output number: 3
Relay output type: Configurable relay logic R1 fault relay NO/NC 100000 cycles, Configurable relay logic R2 sequence relay NO 100000 cycles, Configurable relay logic R3 sequence relay NO 100000 cycles
Refresh time: 5 ms +/- 0.5 ms R1, R2, R3 relay output
Minimum switching current: 5 mA 24 V DC R1, R2, R3 relay output
Maximum switching current: 3 A 250 V AC resistive 1 R1, R2, R3 relay output, 3 A 30 V DC resistive 1 R1, R2, R3 relay output, 2 A 250 V AC inductive 0.4 7 ms R1, R2, R3 relay output, 2 A 30 V DC inductive 0.4 7 ms R1, R2, R3 relay output
Isolation: Between power and control terminals
Specific application: Utility
Discrete and process manufacturing: Building - HVAC compressor centrifugal, Food and beverage processing other application, Mining mineral and metal fan, Mining mineral and metal pump, Oil and gas fan, Water and waste water other application, Building - HVAC screw compressor, Food and beverage processing pump, Food and beverage processing fan, Food and beverage processing atomization, Oil and gas electro submersible pump (ESP), Oil and gas water injection pump, Oil and gas jet fuel pump, Oil and gas compressor for refinery, Water and waste water centrifuge pump, Water and waste water positive displacement pump, Water and waste water electro submersible pump (ESP), Water and waste water screw pump, Water and waste water lobe compressor, Water and waste water screw compressor, Water and waste water compressor centrifugal, Water and waste water fan, Water and waste water conveyor, Water and waste water mixer
Power range: 4...6 kW 200...240 V 3 phases
Motor starter type: Variable speed drive

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV630U55M3 . Santa Clara Systems carries 10,327 items from Telemecanique.