Out of Stock

Telemecanique ATV31HU15N4A variable speed drive ATV31 - 1.5kW - 500V 3-phase supply - EMC filter - IP20 Product Image

ATV31HU15N4A

Telemecanique - variable speed drive ATV31 - 1.5kW - 500V 3-phase supply - EMC filter - IP20

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive ATV31 - 1.5kW - 500V 3-phase supply - EMC filter - IP20
Product weight: 23.59 lb(US) (10.7 kg)
Range of product: Altivar 31
IP degree of protection: IP55
Standards: EN 50178
Protective treatment: TC
Operating altitude: <= 3280.84 ft. (1000 m) without derating>= 3280.84 ft. (1000 m) with current derating 1 % per 100 m
Tightening torque: 5.31 lbf.in (0.6 N.m) Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI67.08 lbf.in (0.8 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
Vibration resistance: 1 gn 13...150 Hz EN/IEC 60068-2-61.5 mm 3...13 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms EN/IEC 60068-2-27
Electrical connection: Terminal 0 in² (2.5 mm²) AWG 14 Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6Terminal 0 in² (2.5 mm²) AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
Insulation resistance: >= 500 mOhm 500 V DC for 1 minute
motor power kW: 4 kW
[Us] rated supply voltage: 380...500 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-35...95 % without dripping water IEC 60068-2-3
Protection type: Input phase breaks driveLine supply overvoltage and undervoltage safety circuits driveLine supply phase loss safety function, for three phases supply driveMotor phase breaks driveOvercurrent between output phases and earth (on power up only) driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor
Response time: 8 ms analog AOV, AOC8 ms discrete R1A, R1B, R1C, R2A, R2B
Switching frequency: 2...16 kHz adjustable
Supply voltage limits: 323...550 V
Dielectric strength: 2410 V DC between earth and power terminals3400 V AC between control and power terminals
Product or component type: Variable speed drive
Network frequency limits: 47.5...63 Hz
Electromagnetic compatibility: 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5Electrical fast transient/burst immunity test level 4 IEC 61000-4-4Electrostatic discharge immunity test level 3 IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Product destination: Asynchronous motors
Speed drive output frequency: 0.5...500 Hz
Product specific application: Simple machine
Nominal switching frequency: 4 kHz
Product certifications: CSAC-TickN998UL
Assembly style: Enclosed
Pollution degree: 2
Component name: ATV31
Braking torque: 100 % with braking resistor continuously30 % without braking resistor<= 150 % with braking resistor 60 s
EMC filter: Integrated
Regulation loop: Frequency PI regulator
Motor slip compensation: Automatic whatever the loadAdjustableSuppressible
Supply frequency: 50...60 Hz - 5...5 %
Output voltage: <= power supply voltage
Phase: 3 phases
Ambient air temperature for storage: -13...158 °F (-25...70 °C)
Ambient air temperature for operation: 14...122 °F (-10...50 °C) without derating with protective cover on top of the drive14...140 °F (-10...60 °C) with derating factor without protective cover on top of the drive

Motor power hp: 5 hp
Insulation: Electrical between power and control
Line current: 10.6 A 500 V 1 kA13.9 A 380 V 1 kA
Supply: Internal supply for logic inputs 19...30 V 100 mA overload protectionInternal supply for logic inputs 19...30 V 100 mA short-circuit protectionInternal supply for reference potentiometer 10...10.8 V 10 mA overload protectionInternal supply for reference potentiometer 10...10.8 V 10 mA short-circuit protection
Apparent power: 9.2 kVA
Analogue input type: Configurable current AI3 0...20 mA 250 OhmConfigurable voltage AI1 0...10 V 30 V max 30000 OhmConfigurable voltage AI2 +/- 10 V 30 V max 30000 Ohm
prospective line Isc: 5 kA
Sampling duration: 4 ms LI1...LI6 discrete8 ms AI1, AI2, AI3 analog
Nominal output current: 9.5 A 4 kHz
Maximum transient current: 14.3 A 60 s
Linearity error: +/- 0.2 % output
power dissipation in W: 150 W at nominal load
Analogue output number: 2
Speed range: 1...50
Analogue output type: Configurable current AOC 0...20 mA 800 Ohm 8 bitsConfigurable voltage AOV 0...10 V 470 Ohm 8 bits
Transient overtorque: Of nominal motor torque
Discrete input logic: Logic input not wired LI1...LI4 < 13 VNegative logic (source) LI1...LI6 > 19 VPositive logic (source) LI1...LI6 < 5 V > 11 V
Asynchronous motor control profile: Factory set : constant torqueSensorless flux vector control with PWM type motor control signal
Discrete output number: 2
Analogue input number: 3
Discrete output type: Configurable relay logic R1A, R1B, R1C 1 NO + 1 NC 100000 cyclesConfigurable relay logic R2A, R2B NC 100000 cycles
Minimum switching current: 10 mA 5 V DC R1-R2
Maximum switching current: 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R22 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R25 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R25 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2
Discrete input number: 6
Discrete input type: Programmable LI1...LI6 24 V 0...100 mA PLC 3500 Ohm
Acceleration and deceleration ramps: S, U or customizedLinear adjustable separately from 0.1 to 999.9 s
Braking to standstill: By DC injection
Local signaling: 1 LED red drive voltageFour 7-segment display units CANopen bus status
Time constant: 5 ms for reference change
Frequency resolution: 0.1 Hz display unit0.1...100 Hz analog input
Communication port protocol: CANopenModbus
Connector type: 1 RJ45 CANopen via VW3 CANTAP2 adaptor1 RJ45 Modbus
Physical interface: RS485 multidrop serial link Modbus
Transmission frame: RTU Modbus
Transmission rate: 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor4800, 9600 or 19200 bps Modbus
Number of addresses: 1...127 CANopen via VW3 CANTAP2 adaptor1...247 Modbus
Number of drive: 127 CANopen via VW3 CANTAP2 adaptor31 Modbus
Marking: CE
Operating position: Vertical +/- 10 degree

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV31HU15N4A . Santa Clara Systems carries 10,416 items from Telemecanique.