Out of Stock

ATS22D88S6

Telemecanique - soft starter-ATS22-control 220V-power 230V(22kW)/400...440V(45kW)/500V(55kW)

Current response time:

By 5AM PT on Friday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: soft starter-ATS22-control 220V-power 230V(22kW)/400...440V(45kW)/500V(55kW)
Product weight: 26.46 lb(US) (12 kg)
Range of product: Altistart 22
IP degree of protection: IP20
Standards: EN/IEC 60947-4-2
Width: 5.71 in (145 mm)
Height: 11.61 in (295 mm)
Depth: 8.15 in (207 mm)
Operating altitude: <= 3280.84 ft. (1000 m) without derating, > 3280.84...< 6561.68 ft. (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
[Uc] control circuit voltage: 230 V -15...10 % 50/60 Hz
Vibration resistance: 1.5 mm 2...13 Hz EN/IEC 60068-2-6, 1 gn 13...200 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms EN/IEC 60068-2-27
motor power kW: 22 kW 230 V, 45 kW 400 V, 45 kW 440 V, 55 kW 500 V
Utilization category: AC-53A
[Us] rated supply voltage: 230...600 V - 15...10 %
Relative humidity: 0...95 % without condensation or dripping water EN/IEC 60068-2-3
Protection type: Phase failure line, Thermal protection starter, Thermal protection motor
Output current: 0.4...1 Icl adjustable
Assembly style: With heat sink
Electromagnetic compatibility: Conducted and radiated emissions level A IEC 60947-4-2, Damped oscillating waves level 3 IEC 61000-4-12, Electrostatic discharge level 3 IEC 61000-4-2, Immunity to electrical transients level 4 IEC 61000-4-4, Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3, Voltage/current impulse level 3 IEC 61000-4-5
Product or component type: Soft starter
Function available: Internal bypass
Product destination: Asynchronous motors
Supply voltage limits: 195...660 V
Product certifications: UL, CSA, GOST, CCC, C-Tick
Product specific application: Pumps and fans
Supply frequency: 50...60 Hz - 10...10 %
Component name: ATS22
Network frequency: 45...66 Hz
Phase: 3 phases

Device connection: In the motor supply line
Noise level: 45 dB
Pollution degree: Level 2 IEC 60664-1
Control circuit consumption: 20 W
Factory setting current: 77 A
Discrete output number: 2
Ambient air temperature for operation: 14...104 F (-10...40 C) without derating, > 104...< 140 F (> 40...< 60 C) with current derating 2.2 % per C
power dissipation in W: 66 W for standard applications
Discrete output type: Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O, Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Ambient air temperature for storage: -13...158 F (-25...70 C)
Minimum switching current: 100 mA 12 V DC relay outputs
Type of start: Start with torque control (current limited to 3.5 In)
Maximum switching current: 5 A 250 V AC resistive 1 relay outputs, 5 A 30 V DC resistive 1 relay outputs, 2 A 250 V AC inductive 0.4 20 ms relay outputs, 2 A 30 V DC inductive 7 ms relay outputs
IcL starter rating: 88 A connection in the motor supply line for standard applications
Discrete input number: 3
Discrete input type: Logic LI1, LI2, LI3 5 mA 4.3 kOhm
Discrete input voltage: 24 V <= 30 V
Discrete input logic: Positive logic LI1, LI2, LI3 < 5 V and <= 2 mA > 11 V >= 5 mA
PTC probe input: 750 Ohm
Communication port protocol: Modbus
Connector type: 1 RJ45
Communication data link: Serial
Physical interface: RS485 multidrop
Transmission rate: 4800, 9600 or 19200 bps
Installed device: 31
Marking: CE
Type of cooling: Forced convection
Operating position: Vertical +/- 10 degree
Power range: 15...25 kW at 200...240 V 3 phases, 30...50 kW at 380...440 V 3 phases, 55...100 kW at 480...500 V 3 phases
Motor starter type: Soft starter

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATS22D88S6 . Santa Clara Systems carries 10,327 items from Telemecanique.