- Description: Strain Gauge Convertor
- Signal type: Analog input
- Connection: Power Rail or terminals 23+, 24-
- Rated voltage: 20 ... 35 V DC
- Input signal: -100 ... 100 mV
- Input II, III: tare adjustment, calibration and zero
- Open circuit voltage/short-circuit current: 18 V / 5 mA
- Current range: -20 ... 20 mA
- Reaction time: 300 ... 850 ms
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on KFD2-WAC2-EX1.D . Santa Clara Systems carries 2,014 items from Pepperl+Fuchs.
- And Final Value<Br/>can Be Entered In This Manner. A Fault Is Signalized By Leds Acc. To Namur Ne44 And A Separate Collective Error Message Output.
- This Isolated Barrier Is Used For Intrinsic Safety Applications. The Device Is Used With Strain Gauges
- Load Cells And Resistance Measuring Bridges. Up To Four 350 ? Strain Gauges Connected In Parallel May Be<Br/>powered And Evaluated. The Device Is Easily Configured By The Use Of Keypad Or With The Pactware Configuration Software. The Current Measurement For Tare
- Zero Point
Alternates
- 122903
- 231221
Common Typos
- KFD2-WAC2-EXI.D
- KFD2-WAC2-EXL.D
- KFD2-WACZ-EX1.D
- KFD2-WACZ-EXI.D
- KFD2-WACZ-EXL.D
- KFDZ-WAC2-EX1.D
- KFDZ-WAC2-EXI.D
- KFDZ-WAC2-EXL.D
- KFDZ-WACZ-EX1.D
- KFDZ-WACZ-EXI.D
- KFDZ-WACZ-EXL.D
Appended Numbers
- KFD2-WAC2-EX1.D-A
- KFD2-WAC2-EX1.D-B
- KFD2-WAC2-EX1.D-C
- KFD2-WAC2-EX1.D-D
- KFD2-WAC2-EX1.D-E
- KFD2-WAC2-EX1.D-F
- KFD2-WAC2-EX1.D-G
- KFD2-WAC2-EX1.D-H
- KFD2-WAC2-EX1.D-I
- KFD2-WAC2-EX1.D-J
- KFD2-WAC2-EX1.D-K
- KFD2-WAC2-EX1.D-L
- KFD2-WAC2-EX1.D-M
- KFD2-WAC2-EX1.D-N
- KFD2-WAC2-EX1.D-O
- KFD2-WAC2-EX1.D-P
- KFD2-WAC2-EX1.D-Q
- KFD2-WAC2-EX1.D-R
- KFD2-WAC2-EX1.D-S
- KFD2-WAC2-EX1.D-T
- KFD2-WAC2-EX1.D-U
- KFD2-WAC2-EX1.D-V
- KFD2-WAC2-EX1.D-W
- KFD2-WAC2-EX1.D-X
- KFD2-WAC2-EX1.D-Y
- KFD2-WAC2-EX1.D-Z