- Description: variable speed drive ATV312 - 5.5kW - 12.8kVA - 292W - 200..240V- 3-phase supply
- Product weight: 14.11 lb(US) (6.4 kg)
- Range of product: Altivar 312
- IP degree of protection: IP20 on upper part without cover plateIP21 on connection terminalsIP31 on upper partIP41 on upper part
- Standards: IEC 61800-3IEC 61800-5-1
- Width: 7.09 in (180 mm)
- Height: 9.13 in (232 mm)
- Depth: 6.77 in (172 mm)
- Protective treatment: TC
- Operating altitude: <= 3280.84 ft. (1000 m) without derating3280.84...9842.52 ft. (1000...3000 m) with current derating 1 % per 100 m
- Tightening torque: 22.12 lbf.in (2.5 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-5.31 lbf.in (0.6 N.m) Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
- Vibration resistance: 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
- Shock resistance: 15 gn 11 ms conforming to EN/IEC 60068-2-27
- Electrical connection: L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.02 in² (16 mm²) AWG 6Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0 in² (2.5 mm²) AWG 14
- Insulation resistance: >= 500 mOhmat 500 V DC for 1 minute
- motor power kW: 5.5 kW
- [Us] rated supply voltage: 200...240 V (- 15...10 %)
- Relative humidity: 5...95 % without condensation conforming to IEC 60068-2-35...95 % without dripping water conforming to IEC 60068-2-3
- Protection type: Input phase breaks driveLine supply overvoltage and undervoltage safety circuits driveLine supply phase loss safety function, for three phases supply driveMotor phase breaks driveOvercurrent between output phases and earth (on power up only) driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor
- Response time: AOV, AOC 8 ms analogR1A, R1B, R1C, R2A, R2B 8 ms discrete
- Switching frequency: 2...16 kHz adjustable
- Supply voltage limits: 170...264 V
- Dielectric strength: 2040 V DC between earth and power terminals2880 V AC between control and power terminals
- Product or component type: Variable speed drive
- Network frequency: 47.5...63 Hz
- Electromagnetic compatibility: Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 31.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
- Product destination: Asynchronous motors
- prospective line Isc: 22 kA
- Product specific application: Simple machine
- Continuous output current: 27.5 A at 4 kHz
- Product certifications: GOSTDNVULCSAC-TickNOM
- Assembly style: With heat sink
- Output frequency: 0...500 kHz
- Pollution degree: 2
- Component name: ATV312
- Nominal switching frequency: 4 kHz
- Motor power hp: 7.5 hp
- Transient overtorque: 170...200 % of nominal motor torque
- Braking torque: 100 % with braking resistor continuously150 % without braking resistor150 % with braking resistor for 60 s
- Supply frequency: 50...60 Hz (- 5...5 %)
- Regulation loop: Frequency PI regulator
- Ambient air temperature for storage: -13...158 °F (-25...70 °C)
- Phase: 3 phases
- Motor slip compensation: SuppressibleAdjustableAutomatic whatever the load
- Ambient air temperature for operation: 14...122 °F (-10...50 °C) without derating with protective cover on top of the drive14...140 °F (-10...60 °C) with derating factor without protective cover on top of the drive
- Line current: 36.8 Afor 200 V, 22 kA32 Afor 240 V
- Output voltage: <= power supply voltage
- EMC filter: Without EMC filter
- Apparent power: 12.8 kVA
- Insulation: Electrical between power and control
- Maximum transient current: 41.3 Afor 60 s
- Analogue input number: 3
- power dissipation in W: 292 W at nominal load
- Analogue input type: AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000 OhmAI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 OhmAI3 configurable current 0...20 mA, impedance 250 Ohm
- Speed range: 1...50
- Sampling duration: AI1, AI2, AI3 8 ms analogLI1...LI6 4 ms discrete
- Asynchronous motor control profile: Factory set : constant torqueSensorless flux vector control with PWM type motor control signal
- Linearity error: +/- 0.2 % output
- Supply: Internal supply for logic inputsat 19...30 V, <= 100 mA for overload and short-circuit protectionInternal supply for reference potentiometer (2.2 to 10 kOhm)at 10...10.8 V, <= 10 mA for overload and short-circuit protection
- Analogue output number: 1
- Communication port protocol: ModbusCANopen
- Analogue output type: AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bitsAOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits
- Discrete input logic: (LI1...LI4) logic input not wired, < 13 V (state 1)(LI1...LI6) negative logic (source), > 19 V (state 0)(LI1...LI6) positive logic (source), < 5 V (state 0), > 11 V (state 1)
- Option card: CANopen daisy chain communication cardDeviceNet communication cardFipio communication cardModbus TCP communication cardProfibus DP communication card
- Discrete output number: 2
- Discrete output type: (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles
- Minimum switching current: R1-R2 10 mAat 5 V DC
- Maximum switching current: R1-R2 on inductive load, 2 A at 250 V AC, (cos phi = 0.4, and L/R = 7 ms)R1-R2 on inductive load, 2 A at 30 V DC, (cos phi = 0.4, and L/R = 7 ms)R1-R2 on resistive load, 5 A at 250 V AC, (cos phi = 1, and L/R = 0 ms)R1-R2 on resistive load, 5 A at 30 V DC, (cos phi = 1, and L/R = 0 ms)
- Discrete input number: 6
- Discrete input type: (LI1...LI6) programmable, 24 V 0...100 mA with PLC, impedance 3500 Ohm
- Acceleration and deceleration ramps: Linear adjustable separately from 0.1 to 999.9 sS, U or customized
- Braking to standstill: By DC injection
- Local signaling: 1 LED red drive voltageFour 7-segment display units CANopen bus status
- Time constant: 5 ms for reference change
- Frequency resolution: Analog input 0.1...100 HzDisplay unit 0.1 Hz
- Connector type: 1 RJ45 Modbus/CANopen
- Physical interface: RS485 multidrop serial link
- Transmission frame: RTU
- Transmission rate: 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen4800, 9600 or 19200 bps Modbus
- Number of addresses: 1...247 Modbus1...127 CANopen
- Number of drive: 127 CANopen31 Modbus
- Marking: CE
- Operating position: Vertical +/- 10 degree
- Outer dimension: 232 x 180 x 170 mm
Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV312HU55M3 . Santa Clara Systems carries 10,431 items from Telemecanique.
- Variable Speed Drive Atv312 - 5.5kw - 12.8kva - 292w - 200..240v- 3-Phase Supply
Alternates
Common Typos
- ATV312HU5SM3
- ATV312HUS5M3
- ATV312HUSSM3
- ATV31ZHU55M3
- ATV31ZHU5SM3
- ATV31ZHUS5M3
- ATV31ZHUSSM3
- ATV3I2HU55M3
- ATV3I2HU5SM3
- ATV3I2HUS5M3
- ATV3I2HUSSM3
- ATV3IZHU55M3
- ATV3IZHU5SM3
- ATV3IZHUS5M3
- ATV3IZHUSSM3
- ATV3L2HU55M3
- ATV3L2HU5SM3
- ATV3L2HUS5M3
- ATV3L2HUSSM3
- ATV3LZHU55M3
- ATV3LZHU5SM3
- ATV3LZHUS5M3
- ATV3LZHUSSM3
Appended Numbers
- ATV312HU55M3-A
- ATV312HU55M3-B
- ATV312HU55M3-C
- ATV312HU55M3-D
- ATV312HU55M3-E
- ATV312HU55M3-F
- ATV312HU55M3-G
- ATV312HU55M3-H
- ATV312HU55M3-I
- ATV312HU55M3-J
- ATV312HU55M3-K
- ATV312HU55M3-L
- ATV312HU55M3-M
- ATV312HU55M3-N
- ATV312HU55M3-O
- ATV312HU55M3-P
- ATV312HU55M3-Q
- ATV312HU55M3-R
- ATV312HU55M3-S
- ATV312HU55M3-T
- ATV312HU55M3-U
- ATV312HU55M3-V
- ATV312HU55M3-W
- ATV312HU55M3-X
- ATV312HU55M3-Y
- ATV312HU55M3-Z
We Deliver!
- ✓ Late West Coast Shipping (5PM PST)
- ✓ Drop-Ship and Blind-Ship Specialists
- ✓ Expertly Packed Static-Limited
- ✓ Same-Day Service
- ✓ In-House Courier