Out of Stock

ATV21HD30N4

Telemecanique - variable speed drive - ATV21 - 30kW 40HP - 480V - EMC filter class A - IP20

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Telemecanique Authorized Distributor.

Description: variable speed drive - ATV21 - 30kW 40HP - 480V - EMC filter class A - IP20
Product weight: 16.53 lb(US) (7.5 kg)
Range of product: Altivar 212
IP degree of protection: IP55
Standards: IEC 61800-3 environments 2 category C2, IEC 61800-3 category C1, IEC 61800-3 environments 2 category C1, IEC 61800-3, EN 55011 group 1 class B, IEC 61800-3 environments 1 category C1, IEC 61800-3 environments 1 category C2, EN 61800-3 environments 2 category C1, IEC 61800-3 environments 1 category C3, EN 61800-3 environments 2 category C3, IEC 61800-3 environments 2 category C3, EN 61800-3 environments 2 category C2, EN 61800-5-1, EN 61800-3 environments 1 category C2, EN 61800-3 environments 1 category C1, EN 61800-3 environments 1 category C3, EN 61800-3, IEC 61800-5-1, EN 61800-3 category C1
Device short name: ATV212
Width: 8.46 in (215 mm)
Height: 11.69 in (297 mm)
Depth: 7.56 in (192 mm)
Operating altitude: 3280.84...9842.52 ft. (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m, <= 3280.84 ft. (1000 m) without derating
Tightening torque: 11.5 lbf.in (1.3 N.m) 11.5 lb.in L1/R, L2/S, L3/T, 0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES
Vibration resistance: 1 gn 13...200 Hz EN/IEC 60068-2-8, 1.5 mm 3...13 Hz EN/IEC 60068-2-6
Shock resistance: 15 gn 11 ms IEC 60068-2-27
Electrical connection: Terminal 0 in (2.5 mm) AWG 14 VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES, Terminal 6 mm AWG 10 L1/R, L2/S, L3/T
Insulation resistance: >= 1 MOhm 500 V DC for 1 minute
motor power kW: 1.5 kW
[Us] rated supply voltage: 380...480 V - 15...10 %
Relative humidity: 5...95 % without condensation IEC 60068-2-3, 5...95 % without dripping water IEC 60068-2-3
Protection type: Motor phase break motor, Break on the control circuit drive, Thermal power stage drive, Overvoltages on the DC bus drive, Against exceeding limit speed drive, Against input phase loss drive, With PTC probes motor, Input phase breaks drive, Line supply overvoltage and undervoltage drive, Line supply undervoltage drive, Overcurrent between output phases and earth drive, Overheating protection drive, Short-circuit between motor phases drive, Thermal protection motor
Response time: 2 ms +/- 0.5 ms FM analog, 7 ms +/- 0.5 ms FLA, FLC discrete, 7 ms +/- 0.5 ms FLB, FLC discrete, 7 ms +/- 0.5 ms RY, RC discrete
Switching frequency: 12...16 kHz with derating factor, 6...16 kHz adjustable
Apparent power: 2.8 kVA 380 V
Electromagnetic compatibility: Conducted radio-frequency immunity test level 3 IEC 61000-4-6, Voltage dips and interruptions immunity test IEC 61000-4-11, 1.2/50 s - 8/20 s surge immunity test level 3 IEC 61000-4-5, Electrical fast transient/burst immunity test level 4 IEC 61000-4-4, Electrostatic discharge immunity test level 3 IEC 61000-4-2, Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Product or component type: Variable speed drive
prospective line Isc: 5 kA
Pollution degree: 2 IEC 61800-5-1
Continuous output current: 3.7 A 380 V, 3.7 A 460 V
Product destination: Asynchronous motors
Maximum transient current: 4 A 60 s
Product specific application: Pumps and fans in HVAC
Speed drive output frequency: 0.5...200 Hz
Assembly style: With heat sink
Nominal switching frequency: 12 kHz
Environmental characteristic: Classes 3C1 IEC 60721-3-3, Classes 3S2 IEC 60721-3-3
Phase: 3 phases
Noise level: 48 dB 86/188/EEC
Speed range: 1...10
Motor power hp: 2 hp
Speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy: +/- 15 %
Ambient air temperature for operation: 14...104 F (-10...40 C) without derating, > 104...122 F (> 40...50 C) with derating factor
Supply voltage limits: 323...528 V
Transient overtorque: 120 % of nominal motor torque +/- 10 % 60 s
Ambient air temperature for storage: -13...158 F (-25...70 C)

Supply frequency: 50...60 Hz - 5...5 %
Asynchronous motor control profile: Voltage/frequency ratio, 2 points, Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo), Voltage/frequency ratio - Energy Saving, quadratic U/f, Flux vector control without sensor, standard, Voltage/frequency ratio, 5 points
Network frequency: 47.5...63 Hz
Regulation loop: Adjustable PI regulator
Product certifications: C-Tick, CSA, UL, NOM 117
EMC filter: Class C1 EMC filter integrated
Motor slip compensation: Not available in voltage/frequency ratio motor control, Automatic whatever the load, Adjustable
Marking: CE
Line current: 3.2 A 380 V, 2.6 A 480 V
Local signaling: 1 LED red DC bus energized
Output voltage: <= power supply voltage
Isolation: Electrical between power and control
Type of cable: IEC cable without mounting kit 1 113 F (45 C) copper 90 C XLPE/EPR, IEC cable without mounting kit 1 45 C copper 70 C PVC, UL 508 cable with UL Type 1 kit 3 40 C copper 75 C PVC
Supply: Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 A overload and short-circuit protection, Internal supply 24 V DC 21...27 V <= 200 A overload and short-circuit protection
Analogue input number: 2
Analogue input type: Switch-configurable voltage VIA 0...10 V DC 24 V max 30000 Ohm 10 bits, Configurable voltage VIB 0...10 V DC 24 V max 30000 Ohm 10 bits, Configurable PTC probe VIB 0...6 probes 1500 Ohm, Switch-configurable current VIA 0...20 mA 250 Ohm 10 bits
Sampling duration: 2 ms +/- 0.5 ms F discrete, 2 ms +/- 0.5 ms R discrete, 2 ms +/- 0.5 ms RES discrete, 3.5 ms +/- 0.5 ms VIA analog, 22 ms +/- 0.5 ms VIB analog
Accuracy: +/- 0.6 % VIA for a temperature variation 60 C, +/- 0.6 % VIB for a temperature variation 60 C, +/- 1 % FM for a temperature variation 60 C
Linearity error: +/- 0.15 % of maximum value input VIA, +/- 0.15 % of maximum value input VIB, +/- 0.2 % output FM
Analogue output number: 1
Analogue output type: Switch-configurable voltage FM 0...10 V DC 7620 Ohm 10 bits, Switch-configurable current FM 0...20 mA 970 Ohm 10 bits
Discrete output number: 2
Discrete output type: Configurable relay logic FLA, FLC NO 100000 cycles, Configurable relay logic FLB, FLC NC 100000 cycles, Configurable relay logic RY, RC NO 100000 cycles
Minimum switching current: 3 mA 24 V DC configurable relay logic
Maximum switching current: 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R, 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R, 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R, 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R
Discrete input type: Programmable F 24 V DC level 1 PLC 4700 Ohm, Programmable R 24 V DC level 1 PLC 4700 Ohm, Programmable RES 24 V DC level 1 PLC 4700 Ohm
Discrete input logic: Positive logic (source) F, R, RES <= 5 V >= 11 V, Negative logic (sink) F, R, RES >= 16 V <= 10 V
Acceleration and deceleration ramps: Automatic based on the load, Linear adjustable separately from 0.01 to 3200 s
Braking to standstill: By DC injection
Dielectric strength: 3535 V DC between earth and power terminals, 5092 V DC between control and power terminals
Frequency resolution: 0.024/50 Hz analog input, 0.1 Hz display unit
Communication port protocol: LonWorks, BACnet, METASYS N2, APOGEE FLN, Modbus
Connector type: 1 RJ45, 1 open style
Physical interface: 2-wire RS 485
Transmission frame: RTU
Transmission rate: 9600 bps or 19200 bps
Data format: 8 bits, 1 stop, odd even or no configurable parity
Type of polarization: No impedance
Number of addresses: 1...247
Communication service: Time out setting from 0.1 to 100 s, Read holding registers (03) 2 words maximum, Monitoring inhibitable, Write multiple registers (16) 2 words maximum, Read device identification (43), Write single register (06)
Option card: Communication card LonWorks
Operating position: Vertical +/- 10 degree
Specific application: HVAC

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on ATV21HD30N4 . Santa Clara Systems carries 10,327 items from Telemecanique.