BMXAMO0802

Modicon - analog output module M340 - 8 outputs

Current response time:

By 5AM PT on Monday

Emergency?

*Santa Clara Systems is not a Modicon Authorized Distributor.

Description: analog output module M340 - 8 outputs
Range of product: Modicon X80
Product weight: 0.33 lb(US) (0.15 kg)
Electrical connection: 1 connector 20 ways
Protective treatment: TC
Relative humidity: 5...95 % without condensation
Standards: EN/IEC 61131-2, UL 61010-2-201, CSA C22.2 No 61010-2-201, EN/IEC 61010-2-201
Operating altitude: 0...6561.68 ft. (0...2000 m), 2000...5000 m (with derating factor)
Measurement error: <= 0.25 % of full scale 0...60 C, 0.1 % of full scale 25 C
Vibration resistance: 3 gn
Product or component type: Analog output module
Temperature drift: 45 ppm/C 0...20 mA, 45 ppm/C 4...20 mA
Shock resistance: 30 gn
Common mode between channels: >= 80 dB
Ambient air temperature for storage: -40...185 F (-40...85 C)
Input output isolation: Non isolated

Isolation voltage: 1400 V DC between channels and ground, 1400 V DC between channels and bus
Ambient air temperature for operation: 32...140 F (0...60 C)
Detection type: Open circuit 4...20 mA, Short circuit 0...20 mA
Load impedance ohmic: <= 350 Ohm 0...20 mA, <= 350 Ohm 4...20 mA
IP degree of protection: IP20
Output level: High level
Product certifications: UL, RCM, Merchant Navy, EAC, CE, CSA
Analogue output number: 8
Analogue output type: Current 0...20 mA, Current 4...20 mA
Analogue output resolution: 15 bits + sign
Supply: Internal power supply via rack
Conversion time: <= 4 ms
Maximum conversion value: 0...21 mA 0...20 mA, 0...21 mA 4...20 mA
Fallback mode: Configurable, Predefined
status LED: 1 LED green RUN, 1 LED per channel green channel diagnostic, 1 LED red ERR, 1 LED red I/O
Current consumption: 150 mA at 3.3 V DC, 74 mA at 24 V DC

Santa Clara Systems specializes in hard-to-find parts. Choose from our overstock inventory and save on BMXAMO0802 . Santa Clara Systems carries 2,090 items from Modicon.